Fluke 9143-A-P-156 Product Manual - Page 36

914X Field Metrology Wells Prog Menu 4.2 Prog Menu 9142/9143/9144 MAIN MENU F1 TEMP SETUP F2 PROG MENU F3 SYSTEM MENU F4 INPUT SETUP (-P only) F1 RUN PROGram TEST STATUS: Changes status of current test RUN TEST: Runs selected test RECORD DATA: (-P only) Records data for ramp/soak or switch tests. TEST ID: < Text, 16 char, English ASCII only > (-P only) Alpha-numeric identification for test F2 RAMP/SOAK Number O.f SETPOINTS: SOAK TIME: Length of time in minutes at which the Field Metrology Well remains at the set point temperature Number O.f CYCLES: Number of times the Field Metrology Well repeats the ramp/soak program DIRECTION: PASS TOLERANCE±: (-P only) Pass/Fail criteria for the ramp/soak program F1 SET POINTS SETPOINT 1: SETPOINT 2: SETPOINT 3: SETPOINT 4: SETPOINT 5: SETPOINT 6: SETPOINT 7: SETPOINT 8: F3 SWITCH TEST TEST METHOD: F1 AUTO TEST SWITCH TEMPerature: Run automated 3-cycle test based on the nominal temperature of the switch F2 MANUAL TEST (Run automated test based on test parameters set below) UPPER TEMPerature: Upper temperature range in which encompasses a change of state for the temperature switch LOWER TEMPerature: Lower temperature range in which encompasses a change of state for the temperature switch APPROACH LIMIT: Temperature parameter in relation to the upper and lower temperature in which the system scan rate will be used Number O.f CYCLES: Number of times the Field Metrology Well repeats the manual test program F4 TEST RESULT (-P only) F1 VIEW TESTS DISPLAY TEST: Displays test results DATE: TIME: F2 PRINT TESTS PRINT TESTS: < NO, YES> Print all test data to RS-232 port F3 ERASE TESTS ERASE TESTS: Erases all test data Figure 12 Main Menu - Prog Menu 30 MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664