Foxconn A74MX-K English manual - Page 42

3 USB Configuration CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. USB Configuration �U��S��B��C��o�n��fi�g�u�r�a��ti�o�n� Help Item Module Version - 2.24.3-13.4 Enables support for legacy USB. �U�S��B��D�e�v�i�c�e�s�E��n�a�b�le�d��: Auto o��p�t�i�o�n��d��is�a��b�l�e�s��� � 1 Drive legacy support if Legacy USB Support [Enabledd]] no USB devices are USB 2.0 Controller Mode [Full Speed c�o�n�n�e�c�te�d�. �B�I�O��S�E��H�C�I��H�a�n�d�-�O�f�f [Enabled] ► USB Storage Configuration [Press Enter] Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Legacy USB Support This item is used to enable the support for USB devices on legacy OS. If you have a USB keyboard or mouse, set to auto or enabled. ► USB 2.0 Controller Mode This item is used to set the transmission rate mode of USB 2.0. The available settings are : [High Speed] in 480Mb/s; [Full Speed] in 12Mb/s. ► BIOS EHCI Hand-Off Windows XP supports a number of features in the Enhanced Host Controller Interface (EHCI) specification, but there are a few features that are not implemented. Microsoft said preliminary support for EHCI BIOS handoff will be available in Windows XP SP2. This item allows you to enable support for OS without EHCI hand-off feature. This is a workaround for OS without EHCI hand-Off support . The EHCI ownership change should claim by EHCI driver. If USB devices are connected to the computer, the following item will appear : ► USB Storage Configuration After pressing , you can set the reset delay for the USB storage device. T��h�e�r�e��a�r�e� many different �e�m��u�la�t�i�o�n��ty�p�e��s�o��f �th��is��U�S��B��d�e�v�i�c�e�,�s��u�c�h��a�s��fl�o�p�p�y�,�h��a�r�d�d��is�k��a�n�d��C��D�R��O��M��c�a�n� be selected. 35