Foxconn A7DA-S English Manual. - Page 16
Install the CPU Cooler
View all Foxconn A7DA-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
2 3. When CPU is properly seated, push the CPU socket lever back to its locked position. Install the CPU Cooler Follow the steps below to correctly install the CPU cooler. It is very simple to fasten and seat the CPU cooler onto your motherboard. (The following procedures use Foxconn cooler as the example.) 1. Apply and spread an even thermal grease on the surface of CPU. 2. Buckle the heatsink firmly at one side of the stand. CAUTION 3. Buckle the heatsink at another side, and press the fasten lever down to tightly seat the cooler. 4. Attach the 3-wire CPU cooler connector to the CPU fan header on the motherboard . ! Use extreme care when removing the CPU cooler because the thermal grease may adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.