Foxconn A7DA-S English Manual. - Page 48
► OnBoard Floppy Controller, ► Serial Port1 Address, ► Serial Port2 Address, ► Serial Port2 Mode, ►
View all Foxconn A7DA-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
3 SuperIO Configuration CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. SuperIO Configuration SuperIO Configuration Help Item OnBoard Floppy Controller Serial Port1 Address Serial Port2 Address Serial Port2 Mode Serial Port2 Duplex Mode [Enabled] Allows BIOS to Enable [3F8/IRQ4] or disable floppy [2F8/IRQ3] controller. [IrDA] [Half Duplex] Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► OnBoard Floppy Controller This item is used to enable/disable Floppy Controller. ► Serial Port1 Address This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial port 1. ► Serial Port2 Address This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial port 2. ► Serial Port2 Mode This item is used to set the mode for the onboard serial port 2. The available settings are : [IrDA] : An IrDA device for maximum 115200 bit/s. [ASK IR] : A faster IrDA for 1152000 bit/s. ► Serial Port2 Duplex Mode It is used to set the transfer mode of the onboard serial port 2. The available settings are : [Half Duplex], [Full Duplex]. 41