Foxconn G31MV-K English Manual. - Page 45
► USB Keyboard Function
View all Foxconn G31MV-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
3 ► OnBoard FDC Controller This item is used to enable or disable the onboard FDC controller. ► OnBoard Serial Port 1 This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial port COM1. ► OnBoard IrDA Port This item is used to assign the I/O address and interrupt request (IRQ) for the onboard IrDA port. ► IrDA Duplex Mode This item enables you to determine the infrared function of the onboard infrared chip. USB Devices Setting Phoenix - AwardBIOS CMOS Setup Utility USB Devices Setting USB 1.1 Controller [Enabled] Item Help USB 2.0 Controller [Enabled] USB Operation Mode [High Speed] Menu Level ► USB Keyboard Function [Enabled] USB Mouse Function [Enabled] [Enabled] / [Disabled] USB Storage Function [Enabled] Universal Host Controller Interface *** USB Mass Storage Device Boot Setting *** for Universal Serial Bus . Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► USB 1.1 Controller This item is used to enable or disable the Universal Host Controller Interface for USB. ► USB 2.0 Controller This item is used to enable or disable the Enhanced Host Controller Interface for USB. ► USB Operation Mode This item is used to set the USB operation mode. If you select the [High Speed], then the USB operation mode is determined by the USB device; select [Full/Low Speed], the USB device operates on full/low speed. ► USB Keyboard Function This item is used to enable the support for USB keyboard on legacy OS. If you have a USB keyboard, set to auto or enabled. ► USB Mouse Function This item is used to enable the support for USB mouse on legacy OS. If you have a USB mouse, set to auto or enabled. ► USB Storage Function This option is used to set whether the USB Mass Storage controller is enabled in a legacy 38