Foxconn G43MX-K English Manual. - Page 31
Central Control Unit
View all Foxconn G43MX-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
3 Central Control Unit CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Central Control Unit Spread Spectrum Smart Power LED ► Voltage Options [Enabled] [Disabled] [Press Enter] Help Item Options Disabled Enabled Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Spread Spectrum If you enabled this function, it can significantly reduce the EMI (Electromagnetic Interference) generated by the system, so to comply with FCC regulation. But if overclocking is activated, you had better disable it. ► Smart Power LED Smart Power LED is a feature built on your motherboard to indicate different states during Power On Self Test (POST). The LED is located at the front panel, and it displays POST state by different long-short blinking intervals. You can always leave this state enabled. System Status Normal No Memory No Display Post Error Message No CPU Fan Power LED Status Always On Continue blinking On (1sec.), Off (1sec.) Continue blinking On (2sec.), Off (2sec.) Quick blinking twice (1/3sec. On, 1/3sec. Off), one long On (1sec.), continuously. Continue blinking On (1/2sec.), Off (1/2sec.) Stop Blinking Condition Always On Reboot & Memory OK Reboot & Display OK Enter Setup or Skip Reboot & Fan OK ► Voltage Options Press to go to its submenu. 24