Foxconn G43MX English Manual. - Page 43
► Parallel Port IRQ
View all Foxconn G43MX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3 SuperIO Configuration CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. SuperIO Configuration SuperIO Configuration Help Item OnBoard Floppy Controller [Enabled] Allows BIOS to enable Serial Port1 [Enabled] or disable floppy IrDA Function [Enabled] controller. IrDA Duplex Mode [Half Duplex] Parallel Port Address [378] Parallel Port Mode [Normal] Parallel Port IRQ [IRQ7] OnBoard CIR Port [2E0] CIR Port IRQ [IRQ10] Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► OnBoard Floppy Controller This item is used to enable/disable Floppy Controller. ► Serial Port1 This item is used to enable/disable the onboard serial port1. ► IrDA Function This item is used to enable/disable onboard infrared chip function. ► IrDA Duplex Mode This item enables you to determine the transfer mode of the onboard infrared chip.Setting values are: [Full Duplex] and [Half Duplex]. ► Parallel Port Address This item is used to assign the I/O address for the onboard parallel port. ► Parallel Port Mode This item is used to set parallel port mode. ► Parallel Port IRQ This item is used to assign the interrupt request (IRQ) for the onboard parallel port. ► OnBoard CIR Port This item specifies the base I/O port address of the onboard Consumer IR port. ► CIR Port IRQ When "OnBoard CIR Port" is set to [2E0]、[3E0]、[298], this item is used to allow BIOS to select Consumer IR port IRQ. 36