Frigidaire FAQE7072LW Complete Owner's Guide (English) - Page 12

Cycle Options

Page 12 highlights

OPERATING INSTRUCTIONS Cycle Options To add options, press the corresponding options buttons to illuminate the selections desired. To delete options, press the options buttons again and the indicator lights will turn off. Some Options require a "Press & Hold" effort to activate or deactivate the secondary function. Not all options are available on every model. To protect your fabrics, not all options are available with every cycle. If an option is not appropriate for the cycle, the indicator will not light. Occasionally, a setting and option in the same cycle will conflict with each other, like Sanitize temp and Damp dry level. When this happens, the option selected first will cause the conflicting option to not be selectable. Í NOTE To change the Options after the cycle starts, press Pause, adjust the setting and press Start to resume the cycle. Allergy (on select models) Use this option to reduce allergens as you dry your load. Not recommended for items prone to heat damage. Energy Saver The Energy Saver option reduces the drying temperature a few degrees to save energy. In conjunction with automatic moisture sensors, cycle times will increase slightly, but overall energy usage will decrease. On some models, you may also notice after the cycle begins most lights and indicators will turn off. To turn those lights temporarily back on press Energy Saver during the cycle. Add Steam (on select models) The Add Steam option injects steam into the clothing prior to cool down to reduce wrinkling. Drum Light ( Press & Hold on some models) The drum light will come on whenever the door is opened to illuminate the drum during loading and unloading. Closing the door turns off the light. The drum light will automatically turn off if the door is left open more than 3 minutes. On models with Press & Hold features, you can activate the drum light during a cycle by pressing and holding the button under Options with the symbol. The light will stay on during the cycle for 3 minutes. To turn it off, press and hold the button again. 12 ultra capacity sanitize high normal low air dry max high normal low damp wrinkle release line dry delay start chime shrink guard control lock ready steam system sanitize high normal low air dry max high normal low damp 90 75 60 30 touch up wrinkle release line dry delay start add steam anti static control lock ready steam system sanitize high normal low air dry max high normal low damp 90 75 60 30 touch up wrinkle release line chime dry delay start shrink guard anti static control lock

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

12
OPERATING INSTRUCTIONS
Cycle Options
To add options, press the corresponding options buttons
to illuminate the selections desired. To delete options,
press the options buttons again and the indicator lights
will turn off. Some Options require a “Press & Hold” effort
to activate or deactivate the secondary function.
Not all options are available on every model. To protect
your fabrics, not all options are available with every cycle.
If an option is not appropriate for the cycle, the indicator
will not light. Occasionally, a setting and option in the
same cycle will con
ict with each other, like
Sanitize
temp and
Damp
dry level. When this happens, the
option selected
rst will cause the con
icting option to
not be selectable.
Allergy (on select models)
Use this option to reduce allergens as you dry your
load. Not recommended for items prone to heat
damage.
Energy Saver
The
Energy Saver
option reduces the drying
temperature a few degrees to save energy. In
conjunction with automatic moisture sensors, cycle
times will increase slightly, but overall energy usage will
decrease. On some models, you may also notice after
the cycle begins most lights and indicators will turn off.
To turn those lights temporarily back on press
Energy
Saver
during the cycle.
Add Steam (on select models)
The
Add Steam
option injects steam into the clothing
prior to cool down to reduce wrinkling.
Drum Light (
Press & Hold on some models)
The drum light will come on whenever the door is
opened to illuminate the drum during loading and
unloading. Closing the door turns off the light. The
drum light will automatically turn off if the door is left
open more than 3 minutes.
On models with
Press & Hold
features, you can
activate the drum light during a cycle by pressing and
holding the button under
Options
with the
symbol.
The light will stay on during the cycle for 3 minutes. To
turn it off, press and hold the button again.
Í
NOTE
To change the
Options
after the cycle starts, press
Pause
, adjust the setting and press
Start
to resume
the cycle.
line
dry
wrinkle
release
delay
start
shrink
guard
anti
static
control
lock
chime
sanitize
high
normal
low
air dry
max
high
normal
low
damp
90
75
60
30
touch
up
ready steam system
line
dry
wrinkle
release
add
steam
delay
start
anti
static
control
lock
sanitize
high
normal
low
air dry
max
high
normal
low
damp
90
75
60
30
touch
up
ready steam system
sanitize
high
normal
low
air dry
max
high
normal
low
damp
line
dry
wrinkle
release
chime
delay
start
shrink
guard
control
lock
ultra capacity