Frigidaire FCRC3005AW Complete Owners Guide - Page 16
Before Setting Oven Controls
View all Frigidaire FCRC3005AW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
BEFORE SETTING OVEN CONTROLS Oven Vent Location Types of oven racks The oven is vented as shown below. When the oven is on, warm air is released through the vent. This venting is necessary for proper air circulation in the oven and good baking results. Do not block oven vent. Never close off the openings with aluminium foil or any other material. Steam or moisture may appear near the oven vent. This is normal. flat oven rack Figure 6: Oven vent WARNING Protective Liners - Do not use aluminum foil or any other material or liners to line the oven bottom, walls, racks or any other part of the range. Doing so will alter the heat distribution, produce poor baking results, and possibly cause permanent damage to the oven interior. Improper installation of these liners may result in risk of electric shock or fire. Figure 7: Oven rack types • Flat oven racks may be used for most cooking needs and may be placed in most oven rack positions. Removing, replacing, and arranging flat or offset oven racks Always arrange the oven racks when the oven is cool. To remove - Pull the oven rack straight forward until it reaches the stop position. Lift up front of oven rack slightly and slide out. To replace - Place the oven rack on the rack guides on both sides of oven walls. Tilt the front of oven rack upward slightly and slide the oven rack back into place. Be sure oven racks are level before using. CAUTION • Always use pot holders or oven mitts when using the oven. When cooking, the oven interior, oven exterior, oven racks, and cooktop will become very hot which can cause burns. • To prevent possible damage to the oven, do not attempt to close the oven door until all the oven racks are fully positioned back inside the oven cavity. 16