Frigidaire FCRC3005AW Complete Owners Guide - Page 26
Removing and Replacing the Oven Door
View all Frigidaire FCRC3005AW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
CARE AND CLEANING Removing and Replacing the Oven Door: CAUTION The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down. Oven door hinge locations To remove the oven door 1. Open oven door completely, horizontal with floor (See Figure 17). 2. Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Figure 18). A tool such as a small flat-blade screwdriver may be required. 3. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 19). 4. Close the door to approximately 10 degrees from the door frame (See Figure 19). 5. Lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Figure 20). To replace the oven door: 1. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 19). 2. Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Figure 19 and Figure 20). The hook of the hinge arms must be fully seated onto the roller pins. 3. Fully open the oven door, horizontal with floor (See Figure 17). 4. Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges to the locked position (See Figure 18). 5. Close the oven door. Figure 17: Door hinge location LOCK Figure 18: Door hinge locks about 10° oven door hinge Figure 19: Holding door for removal roller pin hinge arm IMPORTANT Special door care instructions - Most oven doors contain glass that can break. Do not hit the glass with pots, pans, or any other object. Scratching, hitting, jarring, or stressing the glass may weaken its structure, causing an increased risk of breakage at a later time. Do not close the oven door until all of the oven racks are fully in place. Figure 20: Replacement and location of hinge arm and roller pin 26