Frigidaire FCRE3062AB Installation Instructions - Page 4

30" ELECTRIC REAR CONTROL FREESTANDING INSTALLATION INSTRUCTIONS C. Level and Position Range - Level range by adjusting the (4) leveling legs with a wrench. Note: Aminimum clearance of 1/8" (3 mm) is required between the bottom of the range and the leveling leg to allow room for the bracket. Use a spirit level to check your adjustments. Slide range back into position. Visually check that rear leveling leg is inserted into and fully secured by the Anti-Tip Bracket by removing lower panel or storage drawer. Range Side or Cabinet Side (0", 0.5 mm) Fig. 7 4. Electrical Connection Requirements Avoid fire hazard or electrical shock. Failure to follow this warning may casue serious injury, fire, or death. This appliance must be properly installed and grounded by a qualified technician in accordance with the National Electrical Code ANSI/NFPA No. 70 or Canadian Electrical Code (CSA Standard (C22.1 Part 1) latest editions, and Local Electrical Code requirements. For personal safety, this appliance must be properly grounded. For maximum safety, the power cord must be plugged into an electrical outlet that is correct voltage, is correctly polarized and properly grounded in accordance with local codes. It is the personal responsibilty of the consumer to have the appropiate outlet with the correct, properly grounded wall receptacle installed by a qualified electrician. 5. Models Including Power Cord (Canada) Plug the 4-prong range power cable into a properly grounded, 240V wall outlet. Power supply cord with 4-prong grounding plug 240V grounded wall receptacle Fig. 8 4