Frigidaire FCRE3083AS Complete Owners Guide - Page 31

Setting Self Clean

Page 31 highlights

31 SETTING OVEN CONTROLS • The kitchen area should be well ventilated using an open window, ventilation fan, or exhaust hood during the first self clean cycle. This will help eliminate the normal odors. • Do not attempt to open the oven door when the OVEN LOCK indicator light is flashing. Allow about 15 seconds for the motorized door latch mechanism to completely lock or unlock the oven door. • When the clean time finishes, the oven door will remain locked until the range has cooled sufficiently. In addition to the clean time that was programmed, you must allow about 1 additional hour for the oven to cool before you will be able to open the oven door. Setting Self Clean To set self clean: Be sure the oven is empty and all oven racks are removed. Remove all items from the oven. Be sure oven door is completely closed. 1. Press Self Clean. The warning to remove RACKS will flash in the display to remind you that oven racks should be removed before a self clean. The default 3 hour clean time will appear in the display. RACKS 2. Press START to activate self clean. 3. The RACKS warning will end and Self Clean will start. The motor door lock will begin locking the oven door. Do not open the oven door while the lock motor is running or when any locking indicators or displays are showing. The oven door is completely locked in about 15 seconds. • Once the oven door has locked, CLEAN will appear in the display indicating self clean has started. • Do not force the oven door open when selfclean is active. This can damage the automatic door-locking system. • Use caution when opening the door after self-clean cycle is complete; the oven may still be very hot. 4. When self clean is finished: CLEAN message will turn off, and Hot will appear in display window. 5. Once the oven has cooled down (about 1 hour) and Hot is no longer displayed, the oven door may be opened. CAUTION: To avoid possible burns, use care when opening the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot steam and air to escape. When the oven interior has completely cooled, wipe away any residue or powdered ash with a damp cloth or paper towel.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

31
SETTING OVEN CONTROLS
The kitchen area should be well ventilated using
an open window, ventilation fan, or exhaust
hood during the first self clean cycle. This will
help eliminate the normal odors.
Do not attempt to open the oven door when
the OVEN LOCK indicator light is flashing.
Allow about 15 seconds for the motorized door
latch mechanism to completely lock or unlock
the oven door.
When the clean time finishes, the oven door will
remain locked until the range has cooled suf-
ficiently. In addition to the clean time that was
programmed, you must allow about 1 additional
hour for the oven to cool before you will be
able to open the oven door.
Setting Self Clean
To set self clean:
Be sure the oven is empty and all oven racks are
removed. Remove all items from the oven. Be sure
oven door is completely closed.
1.
Press
Self Clean.
The warning to remove
RACKS
will flash in the display to remind you
that oven racks should be removed before a
self clean. The default 3 hour clean time will
appear in the display.
RACKS
2. Press
START
to activate self clean.
3. The
RACKS
warning will end and Self Clean will
start. The motor door lock will begin locking
the oven door. Do not open the oven door while
the lock motor is running or when any locking
indicators or displays are showing. The oven
door is completely locked in about 15 seconds.
Once the oven door has locked,
CLEAN
will
appear in the display indicating self clean
has started.
Do not force the oven door open when self-
clean is active. This can damage the auto-
matic door-locking system.
Use caution when opening the door after
self-clean cycle is complete; the oven may
still be very hot.
4.
When self clean is finished:
CLEAN
message
will turn off
, and
Hot
will appear in display win-
dow.
5.
Once the oven has cooled down (about 1 hour)
and
Hot
is no longer displayed, the oven door
may be opened.
CAUTION:
To avoid possible burns, use care when
opening the oven door after the self-cleaning cycle.
Stand to the side of the oven when opening the
door to allow hot steam and air to escape.
When the oven interior has completely cooled,
wipe away any residue or powdered ash with a
damp cloth or paper towel.