Frigidaire FCRG3052AS Complete Owners Guide - Page 28
Removing and Replacing the Oven Door
View all Frigidaire FCRG3052AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
CARE AND CLEANING Removing and Replacing the Oven Door To remove oven door: CAUTION The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down. Oven door hinge locations 1. Open oven door completely, horizontal with floor (See Figure 21). 2. Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Figure 22). A tool such as a small flat-blade screwdriver may be required. 3. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 23). 4. Close the door to approximately 10 degrees from the door frame (See Figure 23). 5. Lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Figure 24). To replace oven door: 1. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 23). 2. Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Figure 23 and Figure 24). The hook of the hinge arms must be fully seated onto the roller pins. 3. Fully open the oven door, horizontal with floor (See Figure 21). 4. Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges to the locked position (See Figure 22). 5. Close the oven door. Figure 21: Door hinge location LOCK Figure 22: Door hinge locks about 10° oven door hinge Figure 23: Holding door for removal roller pin hinge arm IMPORTANT Special door care instructions - Most oven doors contain glass that can break. Do not hit the glass with pots, pans, or any other object. Scratching, hitting, jarring, or stressing the glass may weaken its structure, causing an increased risk of breakage at a later time. Do not close the oven door until all of the oven racks are fully in place. Figure 24: Replacement and location of hinge arm and roller pin 28