Frigidaire FFAD6023W1 Complete Owners Guide - Page 15
Fault Codes, Removing Collected Water
View all Frigidaire FFAD6023W1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
15 OPERATING INSTRUCTIONS 9. To shut the unit down, press the ON/OFF button. Removing Collected Water Note: After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored. Fault Codes 1. If the display reads "AS" or "ES" , a sensor has failed. Contact your Authorized Frigidaire Service Center. 1. Emptying the Bucket: a. When the bucket is full, the unit will shut down and the BUCKET FULL indicator will illuminate. 2. If the display reads "P2", Bucket is full or removed or not in right position. Replace the bucket in the right position. b. Do not move the unit at this time otherwise water may spill on the floor. c. Press sides of bucket gently to unclip the bucket from the unit. d. Remove the bucket as shown in the photographs below and empty the bucket.