Frigidaire FFAD6023W1 Complete Owners Guide - Page 17

Operating Instructions & Care And Cleaning

Page 17 highlights

17 OPERATING INSTRUCTIONS & CARE AND CLEANING d. Screw the garden hose onto the threaded portion of the drain connector. (fig.3) h. Select the desired humidity setting and fan speed on the unit for continuous draining to start. fig.3 e. Make sure the hose is secure so there are no leaks. f. Direct the hose toward the drain, making sure that there are no kinks that will stop the water flowing. g. Place the end of the hose into the drain. (fig.4) NOTE 1. Check the seal between the hose and the drain connector. If there is a small leak then replace the hose gasket and re-tighten the hose. 2. It is recommended that a Dehumidifier Drain Hose - 1/2" (12.7 mm) or larger be used. Make sure there are no kinks or elevations in the hose. 3. When a hose is not attached to the drain connector, please ensure drain cap is screwed securely to the connector to prevent leakages. Care and Cleaning 1. Filter Clean the filter every two weeks based on normal operating conditions. To remove the filter: a. Remove the back grille every two weeks based on normal operating conditions. b. To remove the back grille, pull back grille outwards (see figure on the left). c. Wash the back grille with clean water then dry. d. Re-install the back grille. 2. Cabinet a. Dust cabinet with an oil-free cloth, or using a damp cloth. b. Vacuum grill using brush attachment. 3. Water Bucket a. Clean bucket with warm water and detergent.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21

17
OPERATING INSTRUCTIONS & CARE AND CLEANING
d. Screw
the
garden
hose
onto
the
threaded portion of the drain connector.
(fig.3)
fig.3
e. Make sure the hose is secure so there are
no leaks.
f. Direct the hose toward the drain, making
sure that there are no kinks that will stop
the water flowing.
g. Place the end of the hose into the drain.
(fig.4)
h. Select the desired humidity setting and
fan speed on the unit for continuous
draining to start.
NOTE
1. Check the seal between the hose and the
drain connector. If there is a small leak
then
replace
the
hose
gasket
and
re-tighten the hose.
2. It is recommended that a Dehumidifier
Drain Hose - 1/2" (12.7 mm) or larger be
used. Make sure there are no kinks or
elevations in the hose.
3. When a hose is not attached to the drain
connector, please ensure drain cap is
screwed securely to the connector to
prevent leakages.
Care and Cleaning
1. Filter
Clean the filter every two weeks based on
normal operating conditions.
To remove the filter:
a. Remove the back grille every two weeks
based on normal operating conditions.
b. To remove the back grille, pull back grille
outwards (see figure on the left).
c. Wash the back grille with clean water then
dry.
d. Re-install the back grille.
2. Cabinet
a. Dust cabinet with an oil-free cloth, or using
a damp cloth.
b. Vacuum grill using brush attachment.
3. Water Bucket
a. Clean
bucket
with
warm
water
and
detergent.