Frigidaire FFFU16F2VW Complete Owners Guide - Page 10
Controls and Settings, Cool Down Period, Temperature Control, Door Ajar Alert, Power On Light
View all Frigidaire FFFU16F2VW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10 CONTROLS AND SETTINGS Cool Down Period • For safe food storage, allow 4 hours for the appliance to cool down completely. The unit will run continuously for the first several hours. Foods that are already frozen may be placed in the unit after the first few hours of operation. Unfrozen foods should NOT be loaded into freezer until freezer has operated for 4 hours. • When loading freezer, freeze only 3 pounds of fresh food per cubic foot of freezer space at one time. Distribute packages to be frozen evenly throughout the freezer. It is not necessary to turn control knob to a colder setting while freezing food. Temperature Control The temperature control is located inside the freezer on the back wall. The temperature is factory preset to "Recommended" to provide satisfactory food storage temperatures. However, the temperature control is adjustable to provide a range of temperatures for your personal satisfaction. If a colder temperature is desired, turn the temperature control knob toward COLDEST and allow several hours for temperatures to stabilize between adjustments. Temperature Range: -10 to +10ºF Door Ajar Alert If your door has been left open for 5 minutes or more the audible alert will sound until the door is closed. Power On Light The Power On Light indicates the appliance is properly connected to electrical power. The light glows even when the temperature control is turned to OFF. If the light goes out, refer to "Appliance does not run" in the TROUBLESHOOTING section. A flashing light with an audible alert indicates a high temp condition (see "Temperature Too warm" in the TROUBLESHOOTING section. High Temp Alert If the temperature inside the cabinet exceeds 21°F (-6°C), the LED light at the bottom of the cabinet will flash and the alarm will sound. The alarm can be reset by opening and then closing the door. The LED will continue to flash until the cabinet temperature is below 21°F (-6°C). Temperature Control