Frigidaire FGBD2438PB Complete Owner's Guide (English) - Page 7

Status Indicator Lights, Status Window, Dish Preparation, Loading the Top Rack - lowes

Page 7 highlights

OPERATING INSTRUCTIONS Status Indicator Lights The WASHING light comes on at the beginning of cycle and remains on until the end of the main wash. Whether heated or unheated dry is selected the DRYING light will come on during the drying portion of the cycle. With the exception of the Rinse Only cycle, the CLEAN light will come on at end of cycle and remain on until door is opened. When the SANITIZE option is selected, the SANITIZED light will glow when the SANITIZE cycle is finished. The light will remain on until the door is opened. If the dishwasher did not properly sanitize the dishes, the light will not come on. This can happen if the cycle is interrupted. Status Window The STATUS window, available on some models, indicates the following activity: Dish Preparation Scrape away large pieces of food, bones, pits, toothpicks, etc. The continuously filtered wash fluid will remove remaining food particles. Burned-on foods should be loosened before loading. Empty liquids from glasses and cups. Foods such as mustard, mayonnaise, vinegar, lemon juice and tomato based products may cause discoloration of stainless steel and plastics if allowed to sit for a long period of time. Unless the dishwasher is to be operated at once, it is best to pre-rinse or use the Rinse Only cycle to rinse off these food soils. • Load racks so that large items do not prevent the detergent dispenser from opening. • Check manufacturer's recommendations before washing items in question. • If the dishwasher drains into a food disposer, be sure disposer is completely empty before starting the dishwasher. 1H-24H........... CL Hd or HO........ MINUTES......... PF LO Number of delay start hours. The last hour will count down in minutes. Close dishwasher door. The status indicator lights will also flash to indicate current cycle status. Indicates a water heat delay. Number of minutes left in cycle (199). If cycle is longer than 99 minutes, a small light will appear in the lower right corner and remain on until time counts below 99. Appears in window when dishwasher is first installed, or when power has been interrupted. HI-TEMP WASH and NO HEAT DRY indicator lights will also flash. To clear, touch START/CANCEL pad. Appears in window when the rinse aid dispenser is low and needs to be refilled. Loading the Top Rack Features and appearance of racks and silverware basket may vary from your model. The upper rack is designed for flexibility in loading a wide variety of items including cups, glasses, stemware, small plates, bowls, etc. Load glasses in top rack. Damage may occur if placed in bottom rack. Load plastic items in top rack only. Melting may occur if placed in bottom rack. Load items with open ends facing down for better cleaning and draining. Damage may occur if delicate items touch each other during dishwasher operation. Long-handled knives and utensils can be placed in top rack. Be sure nothing protrudes through the bottom of the rack to block rotation of middle spray arm. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

7
OPERATING INSTRUCTIONS
Status Indicator Lights
The WASHING light
comes on at the beginning of cycle
and remains on until the end of the main wash.
Whether heated or unheated dry is selected the DRYING
light will come on during the drying portion of the cycle.
When the SANITIZE option is selected, the SANITIZED
light will glow when the SANITIZE cycle is finished. The
light will remain on until the door is opened. If the
dishwasher did not properly sanitize the dishes, the light
will not come on. This can happen if the cycle is
interrupted.
1H-24H………..
Number of delay start hours. The
last hour will count down in
minutes.
CL………………
Close dishwasher door. The status
indicator lights will also flash to
indicate current cycle status.
Hd or HO…..…
Indicates a water heat delay.
MINUTES…...…
Number of minutes left in cycle (1-
99). If cycle is longer than 99
minutes, a small light will appear in
the lower right corner and remain
on until time counts below 99.
PF………………
Appears in window when
dishwasher is first installed, or
when power has been interrupted.
HI-TEMP WASH and NO HEAT DRY
indicator lights will also flash. To
clear, touch START/CANCEL pad.
LO
................
Appears in window when the rinse
aid dispenser is low and needs to
be refilled.
Status Window
The STATUS window, available on some models,
indicates the following activity:
Dish Preparation
Scrape away large pieces of food, bones, pits, toothpicks,
etc. The continuously filtered wash fluid will remove
remaining food particles. Burned-on foods should be
loosened before loading. Empty liquids from glasses and
cups.
Foods such as mustard, mayonnaise, vinegar, lemon juice
and tomato based products may cause discoloration of
stainless steel and plastics if allowed to sit for a long
period of time. Unless the dishwasher is to be operated at
once, it is best to pre-rinse or use the Rinse Only cycle to
rinse off these food soils.
Load racks so that large items do not
prevent the
detergent dispenser from opening.
Check manufacturer's
recommendations
before washing items
in question.
If the dishwasher
drains into a food
disposer,
be sure
disposer is
completely empty
before starting
the dishwasher.
Loading the Top Rack
Features and appearance of racks and silverware basket
may vary from your model.
The upper rack is designed for flexibility in loading a wide
variety of items including cups, glasses, stemware, small
plates, bowls, etc.
Load glasses in top rack. Damage may occur if placed in
bottom rack.
Load plastic items in top rack only. Melting may occur if
placed in bottom rack.
Load items with open ends facing down for better cleaning
and draining.
Damage may occur if delicate items touch each other during
dishwasher operation.
Long-handled knives and utensils can be placed in top rack.
Be sure nothing protrudes through the bottom of the rack
to block rotation of middle spray arm.
With the exception of the Rinse Only cycle, the CLEAN light
will come on at end of cycle and remain on until door is
opened.