Frigidaire FGDS3065KF Complete Owner's Guide (English) - Page 15

Minimum And Maximum Control Pad Settings, Setting The Clock, Of Day Display

Page 15 highlights

Setting OVEN controls Minimum and Maximum Control Pad Settings All of the features listed below have minimum and maximum time or temperature settings that may be entered into the control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven Lockout pad is delayed 3 seconds). An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above the maximum settings for the feature. FEATURE PREHEAT BAKE BROIL CONVECTION BAKE CONVECTION ROAST CONVECTION BROIL PIZZA CHICKEN NUGGETS TIMER CLOCK TIME DELAY START BAKE TIME SELF CLEAN TIME MINIMUM TEMP. /TIME MAXIMUM TEMP. /TIME 170°F/77°C 550°F/288°C 170°F/77°C 550°F/288°C 400°F/205°C 550°F/288°C 170°F/77°C 550°F/288°C 170°F/77°C 550°F/288°C 400°F/205°C 550°F/288°C 170°F/77°C 550°F/288°C 170°F/77°C 550°F/288°C 12 Hr. Mode 0:01 Min. 11:59 Hr./Min. 24 Hr. Mode 0:01 Min. 11:59 Hr./Min. 12 Hr. Mode 1:00 Hr./Min. 12:59 Hr./Min. 24 Hr. Mode 0:00 Hr./Min. 23:59 Hr./Min. 12 Hr. Mode 1:00 Hr./Min. 12:59 Hr./Min. 24 Hr. Mode 0:00 Hr./Min. 23:59 Hr./Min. 12 Hr. Mode 0:01 Min. 5:59 Hr./Min. 24 Hr. Mode 0:01 Min. 5:59 Hr./Min. 2 hours 4 hours Setting the Clock The SET CLOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash. To set the clock (example below for 1:30) 1. Press SET CLOCK. "CLO" will appear in the display. 2. Press 1 3 0 pads to set the time of day to 1:30. "CLO" will stay in the display. 3. Press START. "CLO" will disappear and the clock will start. Changing between 12 or 24 hour time of day display 1. Press and hold SET CLOCK for 6 seconds. "CLO" will appear in the display. 2. CONTINUE holding the pad until "12Hr dAY" or "24Hr dAY" appears in the display and the control beeps once. 3. Press SELF CLEAN to switch between the 12 and 24 hour time of day display. The display will show either "12Hr dAY" or "24Hr dAY". 4. Press START to accept the change or press CANCEL to reject the change. 5. Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

15
SETTING OVEN CONTROLS
MINIMUM AND MAXIMUM CONTROL PAD SETTINGS
All of the features listed below have minimum and maximum time or temperature settings that may be entered into the
control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven
Lockout
pad is delayed 3 seconds).
An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above
the maximum settings for the feature.
FEATURE
MINIMUM TEMP. /TIME
MAXIMUM TEMP. /TIME
PREHEAT
170°F/77°C
550°F/288°C
BAKE
170°F/77°C
550°F/288°C
BROIL
400°F/205°C
550°F/288°C
CONVECTION BAKE
170°F/77°C
550°F/288°C
CONVECTION ROAST
170°F/77°C
550°F/288°C
CONVECTION BROIL
400°F/205°C
550°F/288°C
PIZZA
170°F/77°C
550°F/288°C
CHICKEN NUGGETS
170°F/77°C
550°F/288°C
TIMER
12 Hr. Mode
0:01 Min.
11:59 Hr./Min.
24 Hr. Mode
0:01 Min.
11:59 Hr./Min.
CLOCK TIME
12 Hr. Mode
1:00 Hr./Min.
12:59 Hr./Min.
24 Hr. Mode
0:00 Hr./Min.
23:59 Hr./Min.
DELAY START
12 Hr. Mode
1:00 Hr./Min.
12:59 Hr./Min.
24 Hr. Mode
0:00 Hr./Min.
23:59 Hr./Min.
BAKE TIME
12 Hr. Mode
0:01 Min.
5:59 Hr./Min.
24 Hr. Mode
0:01 Min.
5:59 Hr./Min.
SELF CLEAN TIME
2 hours
4 hours
SETTING THE CLOCK
The
SET CLOCK
pad is used to set the clock. The clock may
be set for 12 or 24 hour time of day operation.
The clock
has been preset at the factory for the 12 hour operation.
When the range is first plugged in, or when the power
supply to the range has been interrupted, the timer in the
display will flash.
To set the clock
(example below for 1:30)
1. Press
SET CLOCK
. “
CLO
” will appear in the display.
2. Press
1 3 0
pads to set the time of day to 1:30. “
CLO
will stay in the display.
3. Press
START
. “
CLO
” will disappear and the clock will
start.
CHANGING BETWEEN 12 OR 24 HOUR TIME
OF DAY DISPLAY
1. Press and hold
SET CLOCK
for 6 seconds. “
CLO
” will
appear in the display.
2.
CONTINUE
holding the pad until “
12Hr dAY
” or “
24Hr
dAY
appears in the display and the control beeps
once.
3. Press
SELF CLEAN
to switch between the 12 and 24
hour time of day display. The display will show either
12Hr dAY
” or “
24Hr dAY
”.
4. Press
START
to accept the change or press
CANCEL
to
reject the change.
5.
Reset the correct time as described in
To set the Clock
above. Please note that if the 24 hour time of day mode
was chosen, the clock will now display time from 0:00
through 23:59 hours.