Frigidaire FGET3066UF Complete Owners Guide - Page 29

Restoring Factory Default Settings Your appliance was set with predetermined (default) oven control settings. Over time, users may have made changes to these settings. The following options may have been modified since the appliance was new: • 12 or 24 hr display mode • All Meat Probe settings • Continuous bake or 12 hour energy savings mode • Silent or audible control • Oven temperature display (Fahrenheit or Celsius) • Oven temperature adjustments (UPO) CAUTION All of the above user settings will be restored to the factory default settings. To restore oven control to factory default settings: 1. Press and hold 7 on numeric keypad until acceptance tone sounds (about 6 seconds). 2. Press OK/START. The control has been reset with the default settings. SETTING OVEN CONTROLS Adjusting Oven Temperatures Your appliance has been factory calibrated and tested to ensure accurate baking temperatures. For the first few uses, follow your recipe times and temperature recommendations carefully. If you think the oven is cooking too hot or too cool for your recipe times, you may adjust the control so the oven cooks hotter or cooler than the oven temperature displayed. Important: Do not use oven thermometers such as those found in grocery stores to check the temperature settings inside your oven. These oven thermometers may vary as much as 20 to 40°F degrees from actual temperatures. The oven temperature may be increased as much as +35°F (+19°C) or decreased -35°F (-19°C) from the factory calibrated settings. To increase or decrease the oven temperature by 20°F: 1. Press and hold Bake until the control produces an audible tone (about 6 seconds). The factory offset temperature of 0 (zero) should appear in the display. 2. Enter 2 0 using numeric keypad. 3. To offset the oven by -20°F, press self clean to toggle between + and -. 4. Press OK/START to accept change. Important note: • Oven temperature adjustments will not change the Broil, Self Clean, or Keep Warm temperatures. • The oven temperature adjustment may be made if your oven control is set to display temperatures in °C (Celsius). Minimum and maximum settings for Celsius range from plus (+)19°C to minus (-) 19°C. 29