Frigidaire FPGH3077RF Complete Owner's Guide - Page 27

Setting Clean If you are planning to use the oven directly after a clean cycle, remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. A 3 hour clean cycle will actually take about 4 hours to complete. It is recommended to use a 2 hour clean cycle for light soils, a 3 hour cycle for average soils, and a 4 hour cycle for heavy soils. To set the controls for a 3 hour clean cycle and shut off automatically: 1. Turn both the oven mode and oven temperature selectors to CLEAN. The display will show a 3 hour time (normal clean) and the - and + keys. OVEN CONTROLS Figure 32: Setting 4 hour clean Once the control accepts the clean time the display will flash a reminder for the user to REMOVE RACKS. The Figure 33: Display prompting user to remove racks Figure 30: Oven set for 3 hour clean 2. If a 3 hour clean is desired, the control will accept the time within 3 seconds. However, the user may select a 2 or 4 hour clean by using the - or + keys to change to the desired clean time and then allow the control to accept the change. REMOVE RACKS notification will flash for a few seconds prompting the user to remove all oven racks. If the oven door is opened as this time the display will show CLO to indicate that the door must be closed before the clean cycle can begin. If the door remains open for more than 3 minutes, the clean function will be canceled. Figure 31: Setting 2 hour clean Figure 34: Message of open door that must be closed before oven can begin the clean cycle When the oven is set to run the clean cycle, the motor door lock will begin locking the oven door. Do not open the oven door while the lock motor is running or when any locking indicators or displays are showing. The oven door is completely locked in about 15 seconds. 27