Frigidaire FRA123PT1 Complete Owner's Guide (English) - Page 6

Installation Instructions Installation Instructions (continued) Installation in a double-hung sash window 1. Cut the foam seals(adhesive type) to the proper lengths and attach them to the window and stool. (Fig. 12) 2. Attach the window slider kit to the window stool. Adjust the length of the window slider kit according to the width of window. Cut the adjustable window slider kit if the width of window is less than 26.6 inches (Fig. 14). Open the window sash and place the window slider kit on the window stool. (Fig. 13) 4. Close the window sash securely against the window slider kit. (Fig. 15) 5. Cut the foam seal to an appropriate length and seal the open gap between the top window sash and outer window sash, as shown in Fig.16. Window slider kit Foam seal Foam seal A (adhesive type) Fig. 12 Window slider kit 26.6"~48.5" Window stool Fig. 13 Cut this side to fit your window Window stool Fig. 15 Fig. 16 Installation in a sliding sash window 1. Cut the foam seals(adhesive type) to the proper lengths and attach them to the window frame. See Fig.17. 2. Attach the window slider kit to the window stool. Adjust the length of the window slider kit according to the height of window. Cut the adjustable window slider kit if the height of window is less than 26.6 inches (Fig. 14). Open the window sash and place the window slider kit on the window stool. See Fig.18. 4. Close the sliding sash securely against the window slider kit. (Fig. 19) 5. Cut the foam seal to an appropriate length and seal the open gap between the sliding sash and outer window sash, as shown in Fig.20. Fig. 19 Foam seal 6 2009 Electrolux Home Products, Inc. Fig. 20 Fig. 14 Foam seal (adhesive type) Window slider kit Fig. 17 26.6"~48.5" Window stool Fig. 18 All rights reserved.