Frigidaire GLEB27S9FB Timer Guide (Timer Guide) - Page 19

Adjusting Oven Temperature The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is cooking too hot or too cool for the temperature you select, you can adjust the actual oven temperature to be more or less than what is displayed. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed. Note: The oven temperature adjustments made with this feature will not change the Self-Clean cycle temperature or the Broil temperature . INSTRUCTIONS To adjust the oven temperature higher PRESS DISPLAY 1. Press Bake for 6 seconds. 0° will appear in the display (Figure 1). 2. To increase the temperature use the number pads to enter the desired change. (Example 30°F) 3 0 (Figure 2). The temperature may be increased by as much as 35°F (19°C). Bake 3 0 TIMED DELAY TIMER DOOR LOCKED CLEAN CONV BAKE BROIL ROAST WARM PROBE Figure 1 3. Press START to accept the temperature change and the display will return to the time of day (Figure 3). Press Clear /Off to reject the change if necessary. START or Clear /Off TIMED DELAY TIMER DOOR LOCKED CLEAN CONV BAKE BROIL ROAST WARM PROBE Figure 2 To adjust the oven temperature lower 1. Press Bake for 6 seconds. 0° will appear in the display (Figure 4). 2. To decrease the temperature use the number pads to enter the desired change. (Example -30°F) 3 0 and then press Clean (Figure 5). The temperature may be decreased by as much as 35°F (19°C). 3. Press START to accept the temperature change and the display will return to the time of day (Figure 6). Press Clear /Off to reject the change if necessary. Bake 3 0 Clean START or Clear /Off TIMED DELAY TIMER DOOR LOCKED CLEAN CONV BAKE BROIL ROAST WARM PROBE Figure 3 TIMED DELAY TIMER DOOR LOCKED CLEAN CONV BAKE BROIL ROAST WARM PROBE Figure 4 TIMED DELAY TIMER DOOR LOCKED CLEAN CONV BAKE BROIL ROAST WARM PROBE Figure 5 TIMED DELAY TIMER DOOR LOCKED CLEAN CONV BAKE BROIL ROAST WARM PROBE Figure 6 To Set the Oven Control Back To The Factory Default Settings This function allows you to reset the user defined settings back to the original settings. These include 12 or 24 Hour Time of Day Display, Continuous Control Operation or 12 Hour Energy Saving mode, Silent Control Operation or Normal Sounds, Fahrenheit or Celsius Temperature Display, Oven Temperature Adjustment (set back to 0). 1. Press and hold 7 until the first single beep sounds (about 6 seconds) 2. After the first beep, press START pad once. All the setting are now set to the original factory default. 19