Frigidaire GLEB27S9FB Timer Guide (Timer Guide) - Page 2

Setting the Clock The Clock pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the time in the display will flash (See Figure 1). TIMED DELAY TIMER DOOR LOCKED CLEAN CONV BAKE BROIL ROAST WARM PROBE Figure 1 INSTRUCTIONS To set the clock (example below for 1:30) 1. Press Clock . "CLO" will appear in the display (Figure 2). PRESS Clock DISPLAY 2. Press 1 3 0 pads to set the time of day to 1:30 (Figure 3). 1 30 "CLO" will stay in the display. Press START . "CLO" will disappear START and the clock will start (Figure 4). Changing between 12 or 24 hour time of day display 1. Press and hold Clock for 7 seconds (Figure 3). After 7 seconds, "12h" (Figure 5) or "24h" (Figure 6) will appear in the display and the control will beep once. Clock for 7 seconds 2. Press Clean to switch between the 12 and 24 hour time of day Clean display. The display will show either "12h" (Figure 5) or "24h" (Figure 6). TIMED DELAY TIMER DOOR LOCKED CLEAN CONV BAKE BROIL ROAST WARM PROBE Figure 2 TIMED DELAY TIMER DOOR LOCKED CLEAN CONV BAKE BROIL ROAST WARM PROBE Figure 3 TIMED DELAY TIMER DOOR LOCKED CLEAN CONV BAKE BROIL ROAST WARM PROBE Figure 4 3. Press START to accept the change or press Clear /Off to reject the change. 4. Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours. START or Clear /Off Figure 5 Figure 6 2