Frigidaire GLGF376DQ Use and Care Manual - Page 9
Oven Control Functions
UPC - 012505536878
View all Frigidaire GLGF376DQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Oven Control Functions READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various pad functions of the oven as described below. CLOCK PAD- Used to set the time of day. INTERIOR OVEN LIGHT PAD- Used to turn oven interior light ON or OFF. This pad is also used to activate the Cooktop Lockout feature (some models) SELF-CLEAN PAD- Used to select the Self-Cleaning cycle. A 2 or 3 hour Self-Clean time may be selected. BAKE TIME PAD- Used to enter the length of the baking time. UP and DOWN ARROW PADS- Used along with the function pads to select oven temperature, cook time, start time (when programming an automatic start time), time of day, clean time and minute timer. BAKE PAD-Used to select the bake function. FEATURE INDICATOR LIGHTS- These light to show which feature is in use. BROIL PAD- Used to select the variable broil function. OVEN LOCK PAD- Used to set the Oven Lockout function. TIMER ON/OFF PAD- START TIME Used to set or cancel the PAD- Used to set minute timer. The minute the desired start timer does not start or stop time for baking & cooking. Also, Self-Clean. May be TIMER ON/OFF pad is used used with BAKE to set the Continuous Bake TIME to program a feature. delayed bake cycle. OVEN, PREHEAT & DOOR LOCKED LIGHTS* - The "OVEN" light will glow each time the oven turns on to maintain the set oven temperature. The "PREHEAT" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "DOOR LOCKED" light will flash when the oven door locks and unlocks or when using the SelfClean cycle or the oven door lockout is activated. CLEAR/OFF PAD- Used to clear any function previously entered except the time of day and minute timer. Press CLEAR/OFF to stop cooking. *Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the preheat indicator light turns OFF, your oven is ready. For a silent control panel When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for silent operation. Press and hold . After 7 seconds, the control will beep once. This will block the controls from sounding when a pad is pressed. To return the sound, press and hold again for 7 seconds until the control beeps once. Temperature conversion The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C). To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode): 1. Press . "- -" appears in the display. 2. Press and hold the until "HI" appears in the display. 3. Press and hold until °F or °C appears in the display. 4. Press the or to change °F to °C or °C to °F. 5. Press any control pad to return to normal operating mode. 9