Fujitsu 5750C Operator's Guide - Page 124

Introduction CONTENTS 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 6.1 Removing jammed documents 6.2 Indications of operator panel for errors 6.3 Items to check before contacting the dealer where you bought the scanner 6.4 Checking labels on the scanner 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix Symptom : The scanning does not start. Back to the trouble shooting index Did you unlock the shipping lock? YES Turn OFF the scanner and unlock the shipping lock. Reference : "Getting Started" 2.1 Installing the scanner NO Are the documents loaded correctly on the ADF paper chute? YES Load the documents correctly onto the ADF paper chute. NO Is the ADF closed completely? YES Is the interface cable connected correctly? YES Close the ADF completely. NO Connect the interface cable correctly. Reference : "Getting Started" 2.2 Connecting the scanner to NO your PC Is the connecter of interface cable broken? YES (When using the scanner on SCSI interface) Is the SCSI ID set correctly? YES Use a new interface cable and correctly connect it. NO Turn OFF the scanner and set the SCSI ID correctly, then turn ON the scanner again. Reference : "Getting Started" 2.2 Connecting the scanner to NO your PC Doesn't the scanning start even after running ON the scanner again? The scanner operation is normal. NO YES If you cannot solve the problem after taking measures, check the items in "6.3 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. All Rights Reserved, Copyright (C) PFU LIMITED 2003