Fujitsu 5750C Operator's Guide - Page 139
Online setup Continued from the previous
UPC - 097564307232
View all Fujitsu 5750C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Introduction CONTENTS 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 7.1 Online setup 7.2 Double-feed detection 7.3 Setting of Page Edge Filler 7.4 Setting dropout color 7.5 Setting of pre-pick mode 7.6 Resetting the consumables counters 7.7 Adjusting the offset 7.8 Adjust the magnification 7.9 Power saving 8 DOCUMENT SPECIFICATION OF ADF 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix 7.1 Online setup (Continued from the previous page) The following shows the contents of the setup: No Meaning 4 Dropout Color 5 Pre pick 6 Consumable counter Description Use this function to drop out a color in Grayscale or Binary mode. Select "Yes" to enable Prepicking, otherwise select "No". You can estimate the service life of consumables by checking these counters. Be sure to reset the counter when you replaced any consumable. 7 Offset adjustment Set the horizontal and vertical offset for scanning. 8 Vertical magnification Adjustment Set the magnification of a scanned image. 9 Power saving Set the waiting time for the scanner to switch into the power save mode Selectable parameter Red/Green/Blue/White YES/NO The initial value Green YES To reset ADF(front)/ADF(back)/Flat bed Main: -2 to 3 (can be changed by 0.5mm) Sub: -2 to 3 (can be changed by 0.5mm) Right & left : 0mm Top & bottom : 0mm ADF/Flat bed: -6.3% to 6.3% (can be changed by 0.1%) 0% You can set the waiting time from 5 minutes to 55 minutes (can be changed by 5 minutes) 15minutes 1 | 2 All Rights Reserved, Copyright (C) PFU LIMITED 2003