Fujitsu A1220 A1220 User's Guide - Page 88
ExpressCard Problems, Power Failures, Problem, Possible Cause, Possible Solutions
View all Fujitsu A1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Problem Possible Cause Possible Solutions You have installed a USB device, but the notebook does not recognize the device, or the device does not seem to work properly. (continued) ExpressCard Problems The device may have been installed while an application was running, so your notebook is not aware of its installation. Your device may not have the correct software driver active. Close the application and restart your notebook. See your software documentation and activate the correct driver. A card inserted in the ExpressCard slot does not work or is locking up the system. The card is not properly Remove and re-install the card. See "Using ExpressCards" on installed. page 63. The card may have been installed while an application was running, so your notebook is not aware of its installation. Close the application and restart your notebook. Your software may not have the correct software driver active. See your software documentation and activate the correct driver. Power Failures You may have the wrong I/O address selected for your card device. See your ExpressCard documentation to determine the required I/O address. Change the settings in the Device Manager You turn on your LifeBook notebook and nothing seems to happen. The battery is installed but is faulty. Use the Status Indicator panel to verify the presence and condition of the battery. See "Status Indicator Panel" on page 21. If a battery is indicating a short, remove that battery and operate from another power source or replace that battery. 82 - Troubleshooting