Fujitsu A3210 A3210 User's Guide - Page 58
Replacing the Battery, Cold-swapping Batteries
UPC - 611343081634
View all Fujitsu A3210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Replacing the Battery With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not charged. There are two ways to swap batteries, cold-swapping and hot-swapping: Cold-swapping Batteries To cold-swap batteries in your battery bay follow these easy steps: 1 Have a charged battery ready to install. 2 Shut down your notebook and disconnect the AC adapter. 3 While pushing the battery bay release latches towards the battery pack, lift the battery out of the bay using the latches to lift it. 4 Insert a new battery into the bay, and press it down so that the latches click into place. 5 Plug in the AC adapter and turn the power on. Hot-swapping Batteries To hot-swap batteries in your battery bay follow these easy steps: BE SURE TO PLUG IN AN AC ADAPTER PRIOR TO REMOVING THE BATTERY. THERE IS NO BRIDGE BATTERY PRESENT TO SUPPORT THE SYSTEM WHILE THE BATTERY IS BEING REPLACED. IF YOU DO NOT USE AN AC ADAPTER YOU WILL LOSE ANY UNSAVED FILES. 1 Plug an AC Adapter into the system and connect it to a power outlet. 2 Follow steps 3 through 6 in "Cold Swapping Batteries". 53 - Lithium ion Battery