Fujitsu E8210 E8210 Vista BIOS Guide - Page 11
Serial/Parallel Port Configuration Submenu of the Advanced Menu, Base I/O Address/IRQ: [2E8/IRQ 3] - specifications
UPC - 611343055888
View all Fujitsu E8210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Advanced Menu Serial/Parallel Port Configuration Submenu of the Advanced Menu The Serial/Parallel Port Configuration submenu lets you set the I/O addresses and interrupt levels for the serial, infrared and parallel ports of your notebook. I/O addresses, DMA channels and Interrupt levels can be entered in various ways, including via the BIOS setup utility, the control software for the I/O device, or the hardware. If any two ports or devices, serial or parallel, have the same address assigned, your notebook will not function normally. Keep a record of original settings before making any changes if restoration is required. See your hardware and software documentation as well as the setup utility to determine settings and limitations. ■ To prevent IRQ and address conflicts, avoid changing the default settings. If you must change the settings, you can call 1-800-8Fujitsu for technical assistance. ■ If your notebook emits a series of beeps that sounds like a code and the display is blank, refer to the Troubleshooting Section in the system User's Guide. The Troubleshooting Section includes a list of error messages and their meanings. ■ All I/O addresses in Table 5 are in hexadecimal. Advanced PhoenixBIOS Setup Utility Serial/Parallel Port Configurations Item Specific Help Serial port: Base I/O Address/IRQ: Infrared Port: Mode: Base I/O Address/IRQ: DMA Channel: Parallel Port: Mode: Base I/O Address: Interrupt: [Enabled] [3F8/IRQ 4] [Enabled] [FIR] [2E8/IRQ 3] [DMA 3] [Enabled] [Bi-directional] [378] [IRQ 7] [Disabled] The port is disabled. [Enabled] The port is enabled with user configuration. [Auto] Plug & Play OS configures the port. F1 Help ESC Exit Select Item -/Space Change Values F9 Setup Defaults ▲ Select Menu Enter Select Sub-Menu F10 Save and Exit Figure 5. Serial/Parallel Port Configuration Submenu 11