Fujitsu E8210 E8210 Vista BIOS Guide - Page 7

Main Menu Drive1 Submenu of the Main Menu The Drive1 submenu allows you to configure secondary ATA devices. PhoenixBIOS Setup Utility Main Drive1 [MATSHITADVD-RAM UJ-841S] Item Specific Help Type: [Auto] Multi-Sector Transfers: LBA Mode Control: Transfer Mode: Ultra DMA Mode: [Disabled] [Disabled] [Standard] [Disabled] Select Serial ATA/IDE drive installed here. [Auto] The BIOS auto-types the drive on boot time. [None] The drive is disabled. F1 Help ESC Exit Select Item -/Space Change Values F9 Setup Defaults ▲ Select Menu Enter Select Sub-Menu F10 Save and Exit Figure 3. Drive1 Submenu Table 3: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu Menu Field Type: Options ■ Auto ■ None Multi-Sector Transfers: LBA Mode Control: ■ Disabled ■ 2 Sectors ■ 4 Sectors ■ 8 Sectors ■ 16 Sectors ■ Disabled ■ Enabled Default [Auto] [Disabled] [Disabled] Description NOTE: The Type field does not appear as a drop-down menu. Tap the spacebar to toggle the selections. Selects the ATA/ATAPI device type. Select Auto to have the type automatically identified by the BIOS at POST. If None is selected, all of the following setup items do not appear. This option cannot be changed (automatically identified by the BIOS). Specifies the number of sectors per block for multiple sector transfer. Enables or disables Logical Block Addressing in place of Cylinder, Head, Sector addressing. This option cannot be changed (automatically identified by the BIOS). 7