Fujitsu P7230 P7230 BIOS Guide for Configurations: A0E, A0F, A0G, A0H, A0J - Page 6

LifeBook P7000 Notebook BIOS Drive0 Submenu of the Main Menu The Drive0 submenu identifies which ATA devices are installed. PhoenixBIOS Setup Utility Main Advanced Security Power Boot Info Exit Drive0 [TOSHIBA MK6006GAH] Item Specific Help Type: Total Sectors: Maximum Capacity: [Auto] LBA Format 117210240 60012MB Multi-Sector Transfers: LBA Mode Control: Transfer Mode: Ultra DMA Mode: [16 Sectors] [Enabled] [Multiword DMA 2] [Disabled] Select Serial ATA/IDE drive installed here. [Auto] The BIOS auto-types the drive on boot time. [None] The drive is disabled. F1 Help ESC Exit Select Item -/Space Change Values F9 Setup Defaults ▲ Select Menu Enter Select Sub-Menu F10 Save and Exit Figure 2. Drive0 Submenu Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu Menu Field Options Default Description Type: ■ Auto ■ None LBA Format Total Sectors: --- Maximum Capacity: Multi-Sector Transfers: --- ■ Disabled ■ 2 Sectors ■ 4 Sectors ■ 8 Sectors ■ 16 Sectors [Auto] Select [Auto] to have the type of Serial or Parallel ATA device automatically identified by the BIOS at POST. If [None] is selected, the following Set-up items do not appear. Logical Block Addressing (LBA) --- The total number of sectors on your hard disk. This information is automati- cally displayed when [Auto] is selected. --- The maximum capacity of your hard disk. This information is automatically displayed when [Auto] is selected as the Type. [16 Sectors] This information is automatically selected when [Auto] is selected as the Type. 6