Fujitsu S7110 S7110 Vista BIOS Guide - Page 7
Drive1 Submenu of the Main Menu, Table 4: Fields
View all Fujitsu S7110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Main Menu Drive1 Submenu of the Main Menu The Drive1 submenu allows you to configure secondary ATA devices. Note that actual optical drive label shown may vary. Depending on the drive type, information such as cylinders, heads and sectors may also be displayed. PhoenixBIOS Setup Utility Main Drive1 [HL-DT-ST DVDRAM GMA4082Nj] Item Specific Help Type: [Auto] Multi-Sector Transfers: LBA Mode Control: Transfer Mode: Ultra DMA Mode: [Disabled] [Disabled] [Standard] [Disabled] Select ATA/IDE drive installed here. [Auto] The BIOS auto-types the drive on boot time. [None] The drive is disabled. F1 Help ESC Exit Select Item Select Menu -/Space Change Values F9 Setup Defaults ▲ Enter Select Sub-Menu F10 Save and Exit Figure 4. Drive1 Submenu Table 4: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu Menu Field Options Default Description Type: ■ Auto ■ None Multi-Sector Transfers: LBA Mode Control: ■ Disabled ■ 2 Sectors ■ 4 Sectors ■ 8 Sectors ■ 16 Sectors ■ Disabled ■ Enabled [Auto] [Disabled] Selects the ATA/ATAPI device type. Select Auto to have the device (CDROM, CD-R/RW, DVD-ROM, etc.) automatically identified by the BIOS at POST. If None is selected, the following Set-up items do not appear. This option cannot be changed when Auto is selected. Selects the number of sectors per block for multiple sector transfer. [Disabled] Enables or disables Logical Block Addressing in place of Cylinder, Head, Sector addressing. This option cannot be changed when Auto is selected. 7