Fujitsu fi-5530C Operator's Guide

Fujitsu fi-5530C - Document Scanner Manual

Get Fujitsu fi-5530C - Document Scanner PDF manuals and user guides
UPC - 097564306778
View all Fujitsu fi-5530C manuals
Add to My Manuals
Save this manual to your list of manuals

Fujitsu fi-5530C manual content summary:

  • Fujitsu fi-5530C | Operator's Guide - Page 1
    P3PC-1922-01ENZ0 fi-5530C2 Image Scanner Operator's Guide
  • Fujitsu fi-5530C | Operator's Guide - Page 2
  • Fujitsu fi-5530C | Operator's Guide - Page 3
    Different Widths 47 2.3 Scanning Thin Documents 48 2.4 Scanning Documents Longer Than A3 Size 49 2.5 Saving Scanned Images in PDF Format 51 2.6 Excluding a Color from Images (Dropout Color 62 2.7 Skipping Blank Pages 64 2.8 Detecting Multifeeds 66 fi-5530C2 Image Scanner Operator's Guide i
  • Fujitsu fi-5530C | Operator's Guide - Page 4
    the Pick Roller 102 Chapter 5 TROUBLESHOOTING 109 5.1 Removing Jammed Documents 110 5.2 Error Indications in the Function Number Display..... 112 5.3 Remedying Common Troubles 114 5.4 Items to check before contacting the agent where you bought the scanner 127 5.5 Checking Labels on the
  • Fujitsu fi-5530C | Operator's Guide - Page 5
    Multifeed 139 Chapter 7 SCANNER SPECIFICATIONS 141 7.1 Basic Specifications 142 7.2 Installation Specifications 144 7.3 External Dimensions 145 APPENDIX A Using the [Scan] or [Send to] Button AP-1 APPENDIX B GLOSSARY OF TERMS AP-4 INDEX ...IN-1 fi-5530C2 Image Scanner Operator's Guide iii
  • Fujitsu fi-5530C | Operator's Guide - Page 6
    iv
  • Fujitsu fi-5530C | Operator's Guide - Page 7
    INTRODUCTION Thank you for purchasing the fi-5530C2 Duplex Color Scanner. This document describes how to handle the fi-5530C2 and basic operations. Before you start using the fi5530C2, be sure to read this manual thoroughly to ensure correct use. ■Regulatory Information FCC declaration This
  • Fujitsu fi-5530C | Operator's Guide - Page 8
    Bescheimigung des Herstellers / Importeurs Für den fi-5530C2 wird folgendes bescheinigt: •In Übereinsstimmung mit den Bestimmungen der office equipment such as computers, monitors, printers, facsimiles, copiers, scanners, and multifunction devices. Their standards and logos are uniform among
  • Fujitsu fi-5530C | Operator's Guide - Page 9
    the lamps or scanner parts. Trademarks Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries. ISIS and QuickScan are or registered trademarks of the respective companies. fi-5530C2 Image Scanner Operator's Guide ix
  • Fujitsu fi-5530C | Operator's Guide - Page 10
    The user must not perform repairs on this scanner. Contact the store where you purchased the scanner or an authorized FUJITSU Image Scanner service provider to make repairs to this product. Warning Indications Used in This Manual WARNING This indication alerts operators to an operation
  • Fujitsu fi-5530C | Operator's Guide - Page 11
    referring to the User's Manual of the scanner application you are using. The screenshots in this manual were captured from FUJITSU TWAIN 32 scanner driver, ScandAll PRO Image Capturing Utility Software, FUJITSU ISIS scanner driver and Adobe® Acrobat®. fi-5530C2 Image Scanner Operator's Guide xi
  • Fujitsu fi-5530C | Operator's Guide - Page 12
    , since this might cause equipment failure and other troubles or an electric shock. Use this scanner only at the indicated power voltage. Do not connect to multiple-power strips. Use this scanner only at the indicated power voltage and current. Improper power voltage and current might cause fire or
  • Fujitsu fi-5530C | Operator's Guide - Page 13
    smells or noises, disconnect immediately the power plug in order to turn out the scanner. Make sure that any smoke coming from it has stopped, before contacting the store where you bought the scanner or an authorized FUJITSU scanner service provider. fi-5530C2 Image Scanner Operator's Guide xiii
  • Fujitsu fi-5530C | Operator's Guide - Page 14
    and that none of its parts extend beyond the surface top, such as a desk or table. Do not install the scanner on unstable surfaces. Install the scanner on a level surface that is free of vibration to prevent it from falling. Install the scanner on a strong surface that will support the weight of the
  • Fujitsu fi-5530C | Operator's Guide - Page 15
    sunlight. Do not install the scanner under direct sunlight or near heating apparatus. Doing so might cause excessive heat to build up inside the scanner, which can cause scanner trouble or even fire. Install the scanner in a well-ventilated location. fi-5530C2 Image Scanner Operator's Guide xv
  • Fujitsu fi-5530C | Operator's Guide - Page 16
    xvi
  • Fujitsu fi-5530C | Operator's Guide - Page 17
    FUJITSU TWAIN 32 is updated, the screens and operations provided in this chapter may be different from the actual ones. 1.1 Turning the Scanner ON 2 1.2 Placing Documents on the ADF 6 1.3 Scanning Documents 10 1.4 How to Use Scanner Drivers 12 1.5 How to Use ScandAll PRO 29 fi-5530C2 Image
  • Fujitsu fi-5530C | Operator's Guide - Page 18
    the Power button, or by connecting/disconnecting the AC cable. The procedure is as follows: 1. Open the [Scanner Properties] dialog box. 1) Turn on the scanner, and make sure that the scanner is connected to your personal computer. Refer to "2.2 Connecting the Scanner to a PC" in fi-5530C2 Getting
  • Fujitsu fi-5530C | Operator's Guide - Page 19
    XP and Windows Server 2003, right-click on the [fi-5530C2dj] icon, and then select [Properties]. In Windows 2000 and Windows Vista, double-click on the [fi5530C2dj] icon. ⇒ The [fi-5530C2dj Properties] dialog box appears. 5) Select the [Device Set] tab. fi-5530C2 Image Scanner Operator's Guide 3
  • Fujitsu fi-5530C | Operator's Guide - Page 20
    shown below appears. 2. Click the [Power Control] button ⇒ The dialog box shown below appears. 3. In this dialog box, do the following: • To power on/off the scanner by pressing the Power button: ⇒ Select [Enable power switch]. • To power on/off the scanner by connecting/disconnecting the AC cable
  • Fujitsu fi-5530C | Operator's Guide - Page 21
    : • Place documents on the ADF paper chute. • Press any button on the operator panel. The scanner will be turned off when pressing down the power button for 2 seconds or longer. • Execute a command from the scanner driver. BASIC SCANNER OPERATIONS fi-5530C2 Image Scanner Operator's Guide 5
  • Fujitsu fi-5530C | Operator's Guide - Page 22
    SPECIFICATIONS FOR ADF" (page 131). 1. Align the edges of sheets in the document. 1) Confirm that all sheets have the same width. 2) Check the number of the sheets in the document stack. The standard number of sheets that can be loaded on the scanner is as follows: • A4-size paper or smaller that
  • Fujitsu fi-5530C | Operator's Guide - Page 23
    toward the ADF paper chute). 1 ATTENTION Load the documents facing the ADF paper chute.(face down) This scanner can scan ID cards through the ADF with the clean from oil and without labels. • Cards cannot be scanned when the imprinter is installed. fi-5530C2 Image Scanner Operator's Guide 7
  • Fujitsu fi-5530C | Operator's Guide - Page 24
    HINT depending on the lengths of the document. Extension Place the document so that the height of the document will not surpass the HINT line mark located at the side guide. For A4-size paper or smaller, place the document so that the height of the document will not surpass the [Letter/A4
  • Fujitsu fi-5530C | Operator's Guide - Page 25
    and the indentations on the stacker. Indentation 6. Start up the scanner application, and then scan the document. For details on how to scan documents using the ScandAll PRO application, refer to section 1.5 "How to Use ScandAll PRO" on page 29. fi-5530C2 Image Scanner Operator's Guide 9
  • Fujitsu fi-5530C | Operator's Guide - Page 26
    Documents This section explains how to scan documents with this scanner. The following is a basic procedure for scanning documents: 1. Place a document on the scanner. A 2. Launch an application you want to use for scanning. ScandAll PRO 3. Select a scanner to use. FUJITSU TWAIN 32 FUJITSU ISIS
  • Fujitsu fi-5530C | Operator's Guide - Page 27
    • For more information about how to scan documents by using ScandAll PRO, refer to section "1.5 How to Use ScandAll PRO" on page 29. If you want to use other applications for scanning, refer to the respective manuals that come with the applications. fi-5530C2 Image Scanner Operator's Guide 11
  • Fujitsu fi-5530C | Operator's Guide - Page 28
    To scan documents with the scanner, a scanner driver and application supported by the driver are prerequisites. This scanner is accompanied with two drivers; one is a TWAIN-compliant driver, FUJITSU TWAIN 32 Scanner Driver, and the other is an ISIS-compliant driver, FUJITSU ISIS Scanner Driver; and
  • Fujitsu fi-5530C | Operator's Guide - Page 29
    before the actual scanning. You can confirm the image of the documents in the preview window. [OK]/[Close] Button Clicking this button saves the current settings and closes this window. [Reset] Button This button is used to undo changes of settings. fi-5530C2 Image Scanner Operator's Guide 13
  • Fujitsu fi-5530C | Operator's Guide - Page 30
    Button Clicking this button opens an information window about the FUJITSU TWAIN 32 Scanner Driver's version. [Option] Button You can set options in the dialog box below. [Rotation] Tab Select this tab when configuring settings for the image rotation, document size and skew detection, overscan, hole
  • Fujitsu fi-5530C | Operator's Guide - Page 31
    a Setting File. From the next scanning, a set of settings are quickly switched by using these Setting Files. For details of each function, refer to the "FUJITSU TWAIN 32 Scanner Driver Help." BASIC SCANNER OPERATIONS fi-5530C2 Image Scanner Operator's Guide 15
  • Fujitsu fi-5530C | Operator's Guide - Page 32
    ■ FUJITSU ISIS Scanner Driver FUJITSU ISIS Scanner Driver is a driver software used to scan documents with a scanner from an ISIS-compliant application. Usually, you configure settings for scanning in the setup dialog box of the scanner driver, which is invoked from an application. (Depending on the
  • Fujitsu fi-5530C | Operator's Guide - Page 33
    Image Processing Software Option, refer HINT to "Image Processing Software Option USER'S GUIDE". To view "Image Processing Software Option USER'S GUIDE", from the [start] menu, select [All Programs] D [Image Processing Software Option] D [USER'S GUIDE]. fi-5530C2 Image Scanner Operator's Guide
  • Fujitsu fi-5530C | Operator's Guide - Page 34
    . Error Diffusion : This function minimizes differences between a target pixel and pixels near the target. Download : This function processes gray tone images with the dithered pattern downloaded. Cropping Select how to crop scanned document images to output. Fixed : Scanned document images
  • Fujitsu fi-5530C | Operator's Guide - Page 35
    page with the mouse, you can change the size of the area. You can also specify the area by typing in numbers in the boxes. fi-5530C2 Image Scanner Operator's Guide 19
  • Fujitsu fi-5530C | Operator's Guide - Page 36
    are binarized in good conditions. Even if you scan documents containing light text, text on the colored background, and color charts, which do not lend themselves to scanning based on the ordinary binarization, you can obtain high-quality images. NCR forms with back- : You can remove the
  • Fujitsu fi-5530C | Operator's Guide - Page 37
    with white], punch holes will be filled with white. Reverse Image Format You can output reversed images. Overscan You can set the overscan function. Documents are scanned in a paper size larger than the one specified in the [Paper Size] drop-down list. fi-5530C2 Image Scanner Operator's Guide 21
  • Fujitsu fi-5530C | Operator's Guide - Page 38
    document sheet of paper is fed into the ADF at the same time. You can specify based on what (overlap or length) a multifeed error can be detected so that you can stop scanning at error detection and receive an error message. Do not stop scanning upon detection If this checkbox is marked, the scanner
  • Fujitsu fi-5530C | Operator's Guide - Page 39
    Tab 1.4 How to Use Scanner Drivers 1 BASIC SCANNER OPERATIONS Pattern You can select one of five Gamma patterns from Normal, Soft, Sharp, Custom, and Download. Custom Properties You can only when a Color or Grayscale setting is selected under [Mode]. fi-5530C2 Image Scanner Operator's Guide 23
  • Fujitsu fi-5530C | Operator's Guide - Page 40
    [Color Dropout] Tab Color Dropout Any of three primary colors (red-green-blue) can be dropped out from document images. For example, when scanning text in black with the red frame, selecting red color scans only text in black. This setting is available only when
  • Fujitsu fi-5530C | Operator's Guide - Page 41
    [Compression] Tab 1.4 How to Use Scanner Drivers 1 BASIC SCANNER OPERATIONS JPEG Quality You can specify compression levels and image quality for scanning in Color or Grayscale mode. fi-5530C2 Image Scanner Operator's Guide 25
  • Fujitsu fi-5530C | Operator's Guide - Page 42
    . [ON] Checkbox Marking this checkbox enables the imprinter function. Format Template Characters typed in this box are printed on documents. You can use the following characters: Alphabet : A to Z / a to z (single-width) Numerics : 0, 1 to 9 (single-width) Symbols single-width) Year
  • Fujitsu fi-5530C | Operator's Guide - Page 43
    Scanner Drivers Date You can specify how to indicate the date format. Format : Type in the initial value. Delimiter : Select a delimiter, which is a character that identifies the beginning or the end of a character string. 1 BASIC SCANNER . fi-5530C2 Image Scanner Operator's Guide 27
  • Fujitsu fi-5530C | Operator's Guide - Page 44
    [About] Tab On this tab, you can view the information about the ISIS driver and the scanner connected to your personal computer. 28
  • Fujitsu fi-5530C | Operator's Guide - Page 45
    ScandAll PRO. For information about the features of ScandAll PRO, refer to ScandAll PRO HINT Help. ■ Launching ScandAll PRO From the [Start] menu, select [All Programs] D [Fujitsu ScandAll PRO] D [Fujitsu ScandAll PRO]. ⇒ ScandAll PRO starts up. fi-5530C2 Image Scanner Operator's Guide 29
  • Fujitsu fi-5530C | Operator's Guide - Page 46
    ■ Selecting a Scanner Driver ScandAll PRO supports both TWAIN and ISIS standards and allows you to invoke either the TWAIN driver or the ISIS driver for scanning images with the scanner. This scanner comes with two drivers, FUJITSU TWAIN 32 Scanner Driver and FUJITSU ISIS Scanner Driver, which you
  • Fujitsu fi-5530C | Operator's Guide - Page 47
    a scanner you want to use. When the driver is FUJITSU TWAIN 32, select [FUJITSU fi-5530C2dj], and then click the [Select] button. When the driver is FUJITSU ISIS, select [FUJITSU fi-5530C2], and then click the [Select] button. FUJITSU TWAIN 32 FUJITSU ISIS fi-5530C2 Image Scanner Operator's Guide
  • Fujitsu fi-5530C | Operator's Guide - Page 48
    ] to display the setup dialog box. FUJITSU TWAIN 32 FUJITSU ISIS For information about setting items you can configure, refer to section "1.4 How to Use Scanner Drivers" on page 12. ■ How to Scan Documents With ScandAll PRO, you can scan documents with a scanner, in either of two ways: Scan
  • Fujitsu fi-5530C | Operator's Guide - Page 49
    box, configure various settings for saving scanned document images. [Save to file] Checkbox To save scanned document images immediately after scanning, mark this checkbox. If you want to verify scans before saving them to file, clear this checkbox. fi-5530C2 Image Scanner Operator's Guide 33
  • Fujitsu fi-5530C | Operator's Guide - Page 50
    you select a multi-page format such as MultiPage TIFF , PDF, and PDF/A, multiple images can be saved in a file.) Color Format You can specify color mode. Compression You can select how to compress files to save. Document When scanning a document containing more than one page, you can specify whether
  • Fujitsu fi-5530C | Operator's Guide - Page 51
    OPERATIONS FUJITSU TWAIN 32 FUJITSU ISIS 6) When you finished setting, click the [OK] button in the dialog box (FUJITSU TWAIN 32 Scanner Driver/ FUJITSU ISIS Scanner Driver). ⇒ You are returned to the [Scan Setting] dialog box. 7) Click the [Scan] button. fi-5530C2 Image Scanner Operator's Guide
  • Fujitsu fi-5530C | Operator's Guide - Page 52
    driver's dialog box after clicking the [Scan] button in step 7, do the following: In the [Scan Settings] dialog box, clear the [Show TWAIN dialog before each batch scan process] checkbox. ⇒ A document is scanned with the scanner, and the scanned document image is displayed on the ScandAll PRO window
  • Fujitsu fi-5530C | Operator's Guide - Page 53
    Scan allows you to scan documents by using those profiles. 1 1. From the [Scan] menu, select [Batch Scan Settings]. BASIC SCANNER OPERATIONS Or click the [Batch appears in the [Profile Editor] dialog box. (Go to step 3.) fi-5530C2 Image Scanner Operator's Guide 37
  • Fujitsu fi-5530C | Operator's Guide - Page 54
    and saving scanned document images. [General] Tab You can type in a profile name and description, and select a profile type. [Scan] Tab You can configure settings for a scanner to use. Clicking the [Detail Scanner Settings] button displays the setup dialog box of the scanner driver. [File format
  • Fujitsu fi-5530C | Operator's Guide - Page 55
    how to place documents, refer to section "1.2 Placing Documents on the ADF" on page 6. 2. From the [Scan] menu, select [Batch Scan Settings]. ⇒ The [Batch Scan Settings] dialog box appears. Profile List 3. Select a profile you want to use for scanning. fi-5530C2 Image Scanner Operator's Guide 39
  • Fujitsu fi-5530C | Operator's Guide - Page 56
    is scanned with the scanner, and the scanned document image is displayed on the ScandAll PRO window, and then the image is saved to file. B: From the menu (Method 2) 1. Place the document on the scanner. For information about how to place documents, refer to section "1.2 Placing Documents on the ADF
  • Fujitsu fi-5530C | Operator's Guide - Page 57
    the toolbar 1. Place the document on the scanner. For information about how to place documents, refer to section "1.2 Placing Documents on the ADF" on page 6. 2. From the [Select the Batch File] drop-down list on the toolbar, select a profile to use. fi-5530C2 Image Scanner Operator's Guide 41
  • Fujitsu fi-5530C | Operator's Guide - Page 58
    3. Click the [Start Batch Scan] button ( ) on the toolbar. ⇒ A document is scanned with the scanner, and the scanned document image is displayed on the ScandAll PRO window, and then the image is saved to file. 42
  • Fujitsu fi-5530C | Operator's Guide - Page 59
    scanning, Scan or Batch Scan, do either of the following: •From the [Scan] menu, select [Cancel]. 1 •On the tool bar, click the [Cancel] button . BASIC SCANNER OPERATIONS fi-5530C2 Image Scanner Operator's Guide 43
  • Fujitsu fi-5530C | Operator's Guide - Page 60
    44
  • Fujitsu fi-5530C | Operator's Guide - Page 61
    2 This chapter describes how to scan various types of documents, using the combination of ScandAll PRO and FUJITSU TWAIN 32 Scanner Driver as an example. In this chapter, Windows XP screenshots are used as examples. The screens and operations provided herein may be different from actual ones
  • Fujitsu fi-5530C | Operator's Guide - Page 62
    box of FUJITSU TWAIN 32. For information about how to display the scanner driver's setup dialog FUJITSU TWAIN 32 closes. 6. From the ScandAll PRO window, perform a scan. For information about how to scan documents, refer to section "1.5 How to Use ScandAll PRO" on page 29. ⇒ Scanned document images
  • Fujitsu fi-5530C | Operator's Guide - Page 63
    are directly under the pick roller. Off-center documents, which are not under the pick roller, cannot be fed into the scanner. 4. Scan the documents. For information about how to scan documents, refer to section "1.5 How to Use ScandAll PRO" on page 29. fi-5530C2 Image Scanner Operator's Guide 47
  • Fujitsu fi-5530C | Operator's Guide - Page 64
    , refer to section "1.5 How to Use ScandAll PRO" on page 29. ATTENTION Move the Paper Thickness Switch to "Normal" position when scanning documents of standard thickness. Move the switch to "Thin" position only when you scan thin paper, which is of non-standard thickness (less than 52g/m2).
  • Fujitsu fi-5530C | Operator's Guide - Page 65
    . 4. Select [Long page (Front Side)] or [Long page (Duplex)] from the [Scan Type] dropdown list. SCANNING VARIOUS TYPES OF DOCUMENTS ⇒ The [Long Page Paper Size Setting] dialog box appears. 5. Specify a document length, and then click the [OK] button. fi-5530C2 Image Scanner Operator's Guide 49
  • Fujitsu fi-5530C | Operator's Guide - Page 66
    , refer to section "1.5 How to Use ScandAll PRO" on page 29. ⇒ The document is scanned, and the scanned document image is displayed in the ScandAll PRO window. ATTENTION The combined use of the following functions is not possible. • Multi Image Output (page 74) • Auto Color Detection (page 77) 50
  • Fujitsu fi-5530C | Operator's Guide - Page 67
    rates. The file size of color documents increases if scanned by following a general procedure. You can drastically reduce the size if you run Acrobat Distiller before saving. For details, refer to Hint on page 60. SCANNING VARIOUS TYPES OF DOCUMENTS fi-5530C2 Image Scanner Operator's Guide 51
  • Fujitsu fi-5530C | Operator's Guide - Page 68
    setting [Digital Endorser] or [Black Background] options in the TWAIN driver at the same time. Character strings on images or part of background may be missed. Solution 1: In Acrobat, select [File] - [Create PDF] - [From Scanner...] - [Image Settings...], and set [Edge shadow removal] to [OFF] or
  • Fujitsu fi-5530C | Operator's Guide - Page 69
    Fujitsu ScandAll PRO] D [Fujitsu ScandAll PRO] in the order presented. Then, ScandAll PRO starts up. 2 3. In ScandAll PRO, select [PDF File], [SinglePage PDF File], [PDF/A file], or [SinglePage PDF/A file] to save scanned document images -down list. fi-5530C2 Image Scanner Operator's Guide 53
  • Fujitsu fi-5530C | Operator's Guide - Page 70
    with HINT Adobe Acrobat 4.0 (PDF 1.3); [PDF/A file] and [SinglePage PDF/A file] are saved in PDF/A-lb format (format for an archive of digital documents based on PDF 1.4). [SinglePage PDF file] and [SinglePage PDF/A file] create one file per image; [PDF file] and [PDF/A file] create one file
  • Fujitsu fi-5530C | Operator's Guide - Page 71
    [Convert into Searchable PDF] Checkbox The scanned document images are converted into searchable PDF files and saved. PDF files. Once a password is added, you cannot open the PDF files unless you enter a correct password, which you type in in this dialog box. fi-5530C2 Image Scanner Operator's Guide
  • Fujitsu fi-5530C | Operator's Guide - Page 72
    ScandAll PRO" on page 29. ⇒ The scanned image is displayed. \ ATTENTION ScandAll PRO creates PDF files from scanned document images but does not offer the function to open PDF files. You can open PDF files with ScandAll PRO anyway, but the displayed images may not be satisfactory or the operation
  • Fujitsu fi-5530C | Operator's Guide - Page 73
    , Adobe Acrobat starts up. 3. From the [File] menu, select [Create PDF], and then select [From Scanner]. 2 ⇒ The [Acrobat Scan] dialog box appears. 4. Select [FUJITSU fi-5530C2dj] from the [Scanner] drop-down list. SCANNING VARIOUS TYPES OF DOCUMENTS fi-5530C2 Image Scanner Operator's Guide 57
  • Fujitsu fi-5530C | Operator's Guide - Page 74
    Scanner Options] button. ⇒ The [Scanner Options] dialog box appears. 6. If you want to change settings in the [TWAIN driver] dialog box as described in step 9, select [Show Scanner in which you want to save the scanned document image and its file name, and then click the [Save] button. ⇒ The [TWAIN
  • Fujitsu fi-5530C | Operator's Guide - Page 75
    the [Scanning complete] radio button, and then click the [OK] button. ⇒ The scanned doucument image is saved to file and the image is displayed in the Adobe Acrobat window. For details on the operation of Adobe Acrobat, refer to Adobe Acrobat Help. fi-5530C2 Image Scanner Operator's Guide 59
  • Fujitsu fi-5530C | Operator's Guide - Page 76
    save scanned document images as described above, the file size HINT may increase greatly. To reduce the file size, save images following the procedure below. (It may take time than you save as described above.) 1. Select [File] - [Print] 2. In the dialog box below, select [Adobe PDF] from the
  • Fujitsu fi-5530C | Operator's Guide - Page 77
    2.5 Saving Scanned Images in PDF Format 6. Click the [OK] button. 7. Click the [OK] button in the [Print] dialog box. 8. Enter a file name, and then click the [Save] button in the [Save PDF File As] dialog box. 2 SCANNING VARIOUS TYPES OF DOCUMENTS fi-5530C2 Image Scanner Operator's Guide 61
  • Fujitsu fi-5530C | Operator's Guide - Page 78
    in the setup dialog box of the scanner driver. ABC ABC Original Created image Example: When green is selected as a dropout color The following shows the procedure to change settings in the setup dialog box of FUJITSU TWAIN 32 Scanner Driver. 1. From ScandAll PRO, display the setup dialog
  • Fujitsu fi-5530C | Operator's Guide - Page 79
    TWAIN Driver] dialog box, click the [OK] button. ⇒ Changes made are saved and the [TWAIN Driver] dialog box closes. Continue scanning in ScandAll PRO. For information about how to scan documents, refer to section "1.5 How to Use ScandAll PRO" on page 29. fi-5530C2 Image Scanner Operator's Guide 63
  • Fujitsu fi-5530C | Operator's Guide - Page 80
    together in duplex mode, you can obtain the scanned document images without blank pages. Configure the setting in the setup dialog box of the scanner driver. 1. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32. For information about how to display the setup dialog box of the
  • Fujitsu fi-5530C | Operator's Guide - Page 81
    TWAIN Driver] dialog box, click the [OK] button. ⇒ Changes made are saved and the [TWAIN Driver] dialog box closes. Continue scanning in ScandAll PRO. For information about how to scan documents, refer to section "1.5 How to Use ScandAll PRO" on page 29. fi-5530C2 Image Scanner Operator's Guide 65
  • Fujitsu fi-5530C | Operator's Guide - Page 82
    that occurs when two or more sheets are accidentally fed into the ADF at the same time. By changing a setting, you can receive an error message when the scanner detects a multifeed. To enable multifeed detection, change the setting in the setup dialog box of a scanner driver. The following shows the
  • Fujitsu fi-5530C | Operator's Guide - Page 83
    Driver] dialog box, click the [OK] button. ⇒ Changes made are saved and the [TWAIN Driver] dialog box closes. Continue scanning in ScandAll PRO. For information about how to scan documents, refer to section "1.5 How to Use ScandAll PRO" on page 29. fi-5530C2 Image Scanner Operator's Guide 67
  • Fujitsu fi-5530C | Operator's Guide - Page 84
    about how to connect the scanner to your personal computer, refer to "2.2 Connecting the Scanner to a PC" in fi-5530C2 Getting Started on the CDROM . 2) Double-click on the [Printer and Other Hardware] icon in Control Panel. ⇒ The [Printer and Other Hardware] window appears. 3) In the [Printers and
  • Fujitsu fi-5530C | Operator's Guide - Page 85
    XP/Windows Server 2003), or double-click on it (in Windows 2000/Windows Vista), and then select [Properties] from the pop-up menu. ⇒ The [fi-5530C2dj Properties] dialog box appears. 2 5) Select the [Device Set] tab. ⇒ The following dialog box appears. fi-5530C2 Image Scanner Operator's Guide
  • Fujitsu fi-5530C | Operator's Guide - Page 86
    Detection] dialog box. 1) Mark the [Enable] check box. • You can specify an area in the direction of the length of the document HINT for detecting multifeed errors. • Unless the [Enable] checkbox is marked, the area of [Select area for applying Multifeed Detection] or [Select area for not
  • Fujitsu fi-5530C | Operator's Guide - Page 87
    dialog box of the scanner driver, refer to "1.5 2 How to Use ScandAll PRO" on page 29. 2. In the TWAIN Driver dialog box, click the [Option] button. SCANNING VARIOUS TYPES OF DOCUMENTS ⇒ The [Option] dialog box appears. 3. Select the [Rotation] tab. fi-5530C2 Image Scanner Operator's Guide 71
  • Fujitsu fi-5530C | Operator's Guide - Page 88
    scanning speed becomes slower. • When detecting paper sizes of index sheets or documents to which sticky notes or index tabs are attached, set the work properly. 1. Paper is 52g/m2 or less in weight 2. Documents are not rectangular 3. The margin of pages is filled with dark color 5. Click the
  • Fujitsu fi-5530C | Operator's Guide - Page 89
    2.9 Correcting Skew Continue scanning in ScandAll PRO. For information about how to scan documents, refer to section "1.5 How to Use ScandAll PRO" on page 29. 2 SCANNING VARIOUS TYPES OF DOCUMENTS fi-5530C2 Image Scanner Operator's Guide 73
  • Fujitsu fi-5530C | Operator's Guide - Page 90
    . Configure Multi Image settings using the scanner driver. ABC ABC Original Created image Example: When the color document is scanned with Multi Image Output being set The following shows the procedure to change settings in the setup dialog box of FUJITSU TWAIN 32 Scanner Driver. 1. From
  • Fujitsu fi-5530C | Operator's Guide - Page 91
    image. 5. Under [Select Current Image Setting], select a side, and then configure settings for each side in the [TWAIN Driver] dialog box. ATTENTION When scanning in duplex mode, the same [Image Mode] must be selected for both the front and back sides. fi-5530C2 Image Scanner Operator's Guide
  • Fujitsu fi-5530C | Operator's Guide - Page 92
    6. In the [TWAIN Driver] dialog box, click the [OK] button. ⇒ Changes made are saved and the [TWAIN Driver] dialog box closes. Continue scanning in ScandAll PRO. For information about how to scan documents, refer to section "1.5 How to Use ScandAll PRO" on page 29. 76
  • Fujitsu fi-5530C | Operator's Guide - Page 93
    , refer to section "1.5 How to Use ScandAll PRO" on page 29. 2. In the TWAIN Driver dialog box, mark the [Enable Multi Image] checkbox. * When you select [Long page] under [Scan Type], this checkbox is not available. SCANNING VARIOUS TYPES OF DOCUMENTS fi-5530C2 Image Scanner Operator's Guide 77
  • Fujitsu fi-5530C | Operator's Guide - Page 94
    , the same [Image Mode] must be selected for both the front and back sides. 5. In the [TWAIN Driver] dialog box, click the [OK] button. ⇒ Changes made are saved and the [TWAIN Driver] dialog box closes. Continue scanning in ScandAll PRO. For information about how to scan documents, refer to section
  • Fujitsu fi-5530C | Operator's Guide - Page 95
    box of the scanner driver, refer to section "1.5 How to Use ScandAll PRO" on page 29. 2. In the TWAIN Driver dialog box, mark the [Option] checkbox. SCANNING VARIOUS TYPES OF DOCUMENTS ⇒ The [Option] dialog box appears. 3. Select the [Rotation] tab. fi-5530C2 Image Scanner Operator's Guide 79
  • Fujitsu fi-5530C | Operator's Guide - Page 96
    function is not available. 1. Multi Image Output (page 74) 2. Color/ Driver] dialog box. 6. In the [TWAIN Driver] dialog box, click the [OK] button. ⇒ Changes made are saved and the [TWAIN Driver] dialog box closes. Continue scanning in ScandAll PRO. For information about how to scan documents
  • Fujitsu fi-5530C | Operator's Guide - Page 97
    box of the scanner driver, refer to section "1.5 How to Use ScandAll PRO" on page 29. 2. In the TWAIN Driver dialog box, click the [Option] button. SCANNING VARIOUS TYPES OF DOCUMENTS ⇒ The [Option] dialog box appears. 3. Select the [Rotation] tab. fi-5530C2 Image Scanner Operator's Guide 81
  • Fujitsu fi-5530C | Operator's Guide - Page 98
    button. ⇒ You are returned to the [TWAIN Driver] dialog box. 7. In the [TWAIN Driver] dialog box, click the [OK] button. ⇒ Changes made are saved and the [TWAIN Driver] dialog box closes. Continue scanning in ScandAll PRO. For information about how to scan documents, refer to section "1.5 How to Use
  • Fujitsu fi-5530C | Operator's Guide - Page 99
    Page Size Detection] enabled, the document of a size larger than the specified page size is scanned. • With [Black Background] selected, the document of a different size from the specified page size is scanned. 2 SCANNING VARIOUS TYPES OF DOCUMENTS fi-5530C2 Image Scanner Operator's Guide 83
  • Fujitsu fi-5530C | Operator's Guide - Page 100
    Start] menu, select [Control Panel]. 2. Select [Scanners and Cameras]. 3. Display the [fi-5530C2dj Properties] dialog box. In Windows XP or Windows Server 2003, right-click on the [fi-5330C2dj] icon. In Windows 2000 or Windows Vista, double-click on the [fi-5330C2dj] icon. 4. Select the [Events] tab
  • Fujitsu fi-5530C | Operator's Guide - Page 101
    ScandAll PRO. From the [Start] menu, select [All Programs] D [Fujitsu ScandAll PRO] D [Fujitsu ScandAll PRO], and then ScandAll PRO starts up. 9. From the [Tool] menu, select [Preferences]. ⇒ The [Setup] dialog box appears. 10. Select the [Event] tab. fi-5530C2 Image Scanner Operator's Guide 85
  • Fujitsu fi-5530C | Operator's Guide - Page 102
    11. Click the action of the Event you selected in step 5, and then select a profile from the list you want to use for scanning. You have to create profiles beforehand. HINT For information about how to create profiles, refer to "Batch Scan" (page 37) in section "1.5 How to Use ScandAll PRO" on
  • Fujitsu fi-5530C | Operator's Guide - Page 103
    parts of the scanner, disconnect the AC adapter from the power outlet, and wait at least 15 minutes. Do not turn off the scanner when you clean the Feed and Eject Rollers. 3.1 Cleaning Materials and Locations requiring Cleaning 88 3.2 Cleaning the ADF 90 fi-5530C2 Image Scanner Operator's Guide
  • Fujitsu fi-5530C | Operator's Guide - Page 104
    - Commercially available one For details about the cleaning materials, contact the FUJITSU scanner dealer where you purchased the scanner. *1) It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the scanner parts, dampen a cloth with modest quantities of the
  • Fujitsu fi-5530C | Operator's Guide - Page 105
    all over the page • Chemically treated documents such as carbonless paper • Documents containing a large amount of calcium carbonate • A large volume of documents written with pencil • Documents on which the toner is not fused sufficiently 3 DAILY CARE fi-5530C2 Image Scanner Operator's Guide 89
  • Fujitsu fi-5530C | Operator's Guide - Page 106
    more frequently when you scan documents on which the toner is not firmly fixed on. WARNING The glass surface inside the ADF becomes hot during the operation of the scanner. Before you start to clean the inner parts of the scanner, disconnect the AC adapter from the power outlet, and wait at least
  • Fujitsu fi-5530C | Operator's Guide - Page 107
    vaporizes if a large quantity is used. When cleaning the scanner parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off the cleaner completely with a soft lintfree cloth to leave no residue on the surface of the cleaned parts. fi-5530C2 Image Scanner Operator's Guide 91
  • Fujitsu fi-5530C | Operator's Guide - Page 108
    Pad ASSY (rubber surface) downward (in the direction of the arrow). Areas to be cleaned • Pick rollers Clean the Pick rollers lightly preventing scratches on the rollers' surface. Take particular care in cleaning these rollers as black debris on them adversely affects the pickup performance. Pick
  • Fujitsu fi-5530C | Operator's Guide - Page 109
    damage the sponges beside the rollers. • Sheet guides Wipe clean lightly. • Glass Wipe clean lightly. ATTENTION If the glass gets dirty, vertical black streaks may appear in the scanned images. • Ultra sonic sensor Wipe clean lightly with a dry cloth. fi-5530C2 Image Scanner Operator's Guide 93
  • Fujitsu fi-5530C | Operator's Guide - Page 110
    3. Push the ADF at its center to return it to its original position and lock the ADF button. Push the center of the ADF ATTENTION Close the ADF until you hear it click. Paper jams or feeding errors may occur if the ADF is not closed firmly. 94
  • Fujitsu fi-5530C | Operator's Guide - Page 111
    very hot. Before you replace the consumables, turn off the power and unplug the AC adapter from the outlet, and wait for at least 15 minutes. 4.1 Consumable and Replacement Cycle 96 4.2 Replacing the Pad ASSY 99 4.3 Replacing the Pick Roller 102 fi-5530C2 Image Scanner Operator's Guide 95
  • Fujitsu fi-5530C | Operator's Guide - Page 112
    how frequently the scanner is used and cleaned. ATTENTION Use only the specified consumables to avoid document feeding trouble. ■ Guidelines on the power, make sure that the scanner is connected to your personal computer. Refer to "2.2 Connecting the Scanner to a PC" in fi-5530C2 Getting Started
  • Fujitsu fi-5530C | Operator's Guide - Page 113
    In Windows XP or Windows Server 2003, right-click on the [fi-5530C2dj] icon, and then select [Properties]. In Windows 2000 or Windows Vista, double-click on the [fi- 5530C2dj] icon. ⇒ The [fi-5530C2 Properties] dialog box appears. REPLACING CONSUMABLES fi-5530C2 Image Scanner Operator's Guide
  • Fujitsu fi-5530C | Operator's Guide - Page 114
    ink (When the imprinter is connected, the remaining ink in the imprinter is indicated.) The following message may appear during use of the scanner: Replace consumables when you see this message. Click the [Ignore] button to hide this message and continue scanning. It is recommended that the
  • Fujitsu fi-5530C | Operator's Guide - Page 115
    4.2 Replacing the Pad ASSY 4.2 Replacing the Pad ASSY 1. Remove all documents from the ADF paper chute. 2. Open the ADF by pushing down the ADF button. 4 ADF the Pad ASSY and slide it to the arrow direction, and then remove it. REPLACING CONSUMABLES fi-5530C2 Image Scanner Operator's Guide 99
  • Fujitsu fi-5530C | Operator's Guide - Page 116
    to the direction "A" and install it. ATTENTION Make sure that the Pad ASSY is firmly attached. If the Pad ASSY is not correctly attached, document jams or other feeding errors may occur. 5. Push the ADF at its center to close it, and lock the ADF. Push the center of the ADF 100
  • Fujitsu fi-5530C | Operator's Guide - Page 117
    ] button of [Pad] under [Page Counter], and then the [OK] button. ⇒ The following message appears. Click the [OK] button. The Pad counter is reset to "0". fi-5530C2 Image Scanner Operator's Guide 101
  • Fujitsu fi-5530C | Operator's Guide - Page 118
    4.3 Replacing the Pick Roller 1. Remove all documents from the ADF paper chute. 2. Remove the ADF paper chute. ADF paper chute 3. Open the ADF by pushing down the ADF button. 102 ADF button CAUTION Be careful, the ADF cover may close and pinch your fingers.
  • Fujitsu fi-5530C | Operator's Guide - Page 119
    4.3 Replacing the Pick Roller 4. Remove the Pick roller from the scanner. 1) Pinch the knobs on the sheet guide and lift up the sheet guide to remove it. Sheet guide 4 2) Rotate the Pick roller bushing in the direction of the arrow. Pick roller bushing fi-5530C2 Image Scanner Operator's Guide 103
  • Fujitsu fi-5530C | Operator's Guide - Page 120
    3) Remove the Pick roller shaft while lifting it up in the direction of the arrow. CAUTION As the Pick roller bushing is firmly fixed, do not try to turn the roller bushing with your fingernails. Use a paper clip for turning the roller bushing if you cannot rotate it with your finger. 5. Remove
  • Fujitsu fi-5530C | Operator's Guide - Page 121
    the Pick roller is correctly attached. The incompletelyattached Pick roller might cause document jams or other feed errors. When attaching the Pick roller to the shaft, make sure that the roller's tab clicks in to place. "Click" REPLACING CONSUMABLES fi-5530C2 Image Scanner Operator's Guide 105
  • Fujitsu fi-5530C | Operator's Guide - Page 122
    shaft to the scanner. Attach the Pick roller shaft to the scanner in reverse order of removing. 1) Set the Pick roller inserting an end of shaft into the shaft hole. Shaft hole Shaft 2) Turn the Pick roller bushing in the direction of the arrow. Pick roller bushing 3) Attach the sheet guide. 106
  • Fujitsu fi-5530C | Operator's Guide - Page 123
    4.3 Replacing the Pick Roller 8. Push in the center of the ADF to close it until the ADF button is locked. Press the center of the ADF 9. Attach the ADF paper chute to the scanner. ADF Paper Chute 4 REPLACING CONSUMABLES fi-5530C2 Image Scanner Operator's Guide 107
  • Fujitsu fi-5530C | Operator's Guide - Page 124
    control panel of your personal computer. 3) Open the [Properties] of [fi-5530C2dj] from the [Scanners and Cameras]. ⇒ The [Properties of fi-5530C2dj] dialog box is displayed. 4) Click the [Device Set] tab. ⇒ The following window appears. 5) After clicking the [Clear] button beside [Pick Roller] in
  • Fujitsu fi-5530C | Operator's Guide - Page 125
    5 5.1 Removing Jammed Documents 110 5.2 Error Indications in the Function Number Display 112 5.3 Remedying Common Troubles 114 5.4 Items to check before contacting the agent where you bought the scanner...... 127 5.5 Checking Labels on the Scanner 130 fi-5530C2 Image Scanner Operator's Guide 109
  • Fujitsu fi-5530C | Operator's Guide - Page 126
    . CAUTION • Take care not to get injured when removing the jammed documents. • Be careful not to get neckties, necklaces, etc. entangled in the scanner when removing the jammed documents. • The surface of the glass may become hot during operation. Take care not to get burned. 1. Remove all
  • Fujitsu fi-5530C | Operator's Guide - Page 127
    remove the documents remaining in the ADF. 1. Remove all documents from the ADF paper chute. 2. Open the ADF by pushing down the ADF button. 3. Remove the remaining documents. 4. Push in the center of the ADF to close it until the ADF button is locked. fi-5530C2 Image Scanner Operator's Guide 111
  • Fujitsu fi-5530C | Operator's Guide - Page 128
    Imprinter option (sold separately). For details refer to fi-553PR Operator's Guide, chapter "5 Error Message". The Error Recover Guide is stored in Setup CD-ROM. For installing the HINT application software, refer to "2.3 Installing the Scanner Application" in fi- 5530C2 Getting Started. 112
  • Fujitsu fi-5530C | Operator's Guide - Page 129
    memory (EEPROM). E8 The SCSI interface fuse has blown out. E9 An error in the image memory. Ec An alarm in the memory. Ed Trouble in the SCSI interface controller EF Trouble in the Background switching mechanism 5 TROUBLESHOOTING fi-5530C2 Image Scanner Operator's Guide 113
  • Fujitsu fi-5530C | Operator's Guide - Page 130
    you bought the scanner or an authorized FUJITSU scanner service provider. Symptom 1 Scanner cannot be turned ON. Are power cable and AC adapter correctly connected? NO Correctly connect power cable. YES Are you using the correct AC cable NO and AC adapter supplied with the scanner from the
  • Fujitsu fi-5530C | Operator's Guide - Page 131
    normal. YES If you cannot solve the problem after taking measures, check the items in "5.4 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. 5 TROUBLESHOOTING fi-5530C2 Image Scanner Operator's Guide 115
  • Fujitsu fi-5530C | Operator's Guide - Page 132
    operation is normal. If you cannot solve the problem after taking measures, check the items in "5.4 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. *) For details, refer to Getting Started "2.2 Connecting
  • Fujitsu fi-5530C | Operator's Guide - Page 133
    "5.4 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. 5 *) For details on how to clean dirty locations, refer to "3 DAILY CARE" on page 87. TROUBLESHOOTING fi-5530C2 Image Scanner Operator's Guide 117
  • Fujitsu fi-5530C | Operator's Guide - Page 134
    (*) YES If you cannot solve the problem after taking measures, check the items in "5.4 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. *) For details on how to clean dirty locations, refer to "3 DAILY CARE
  • Fujitsu fi-5530C | Operator's Guide - Page 135
    in "5.4 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. 5 TROUBLESHOOTING *) For details on how to clean dirty locations, refer to "3 DAILY CARE" on page 87. fi-5530C2 Image Scanner Operator's Guide 119
  • Fujitsu fi-5530C | Operator's Guide - Page 136
    . NO If you cannot solve the problem after taking measures, check the items in "5.4 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. *) The ADF glass, refer to "3.2 Cleaning the ADF" on page 90. 120
  • Fujitsu fi-5530C | Operator's Guide - Page 137
    normal. YES If you cannot solve the problem after taking measures, check the items in "5.4 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. 5 TROUBLESHOOTING fi-5530C2 Image Scanner Operator's Guide 121
  • Fujitsu fi-5530C | Operator's Guide - Page 138
    just been printed out by a copier or laser printer? YES When scanning documents like this, disable the multifeed detection. Fan the documents before loading, or reduce the number of sheets of the documents. Fan the documents 3 or 4 times to remove static electricity from the paper. NO Is the
  • Fujitsu fi-5530C | Operator's Guide - Page 139
    , refer to the "3.2 Cleaning the ADF" on page 90. *6) For details on how to replace (or attach) the Pad ASSY, refer to "4.2 Replacing the Pad ASSY" on page 99. *7) For details on how to clean the Pad ASSY, refer to "3.2 Cleaning the ADF" on page 90. fi-5530C2 Image Scanner Operator's Guide 123
  • Fujitsu fi-5530C | Operator's Guide - Page 140
    . (*3) If you cannot solve the problem after taking measures, check the items in "5.4 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. *1) For details, refer to "6.2 Document Quality" on page 133. *2) For
  • Fujitsu fi-5530C | Operator's Guide - Page 141
    "5.4 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider. *) For details on how to clean the rollers, refer to "3.2 Cleaning the ADF" on page 90. 5 TROUBLESHOOTING fi-5530C2 Image Scanner Operator's Guide 125
  • Fujitsu fi-5530C | Operator's Guide - Page 142
    for scanning the document)? NO Right click the Scanner Control Center icon and select [Options] then adjust the [Sub-scan Setting]. YES Check the items in "5.4 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider
  • Fujitsu fi-5530C | Operator's Guide - Page 143
    Labels on the Scanner" on page 130. Production date (Example) 2007-07 (July, 2007) For details on the production date, refer to "5.5 Checking Labels on the Scanner" on page 130. Date of purchase Symptom Frequency of trouble 5 TROUBLESHOOTING fi-5530C2 Image Scanner Operator's Guide 127
  • Fujitsu fi-5530C | Operator's Guide - Page 144
    system Item Document type Main purpose of use Last cleaning date Last consumables replacement date Operator panel status at trouble Findings • Problems in the imaging system Item Type and version of scanner driver Type of interface controller OS (Windows®) Application software Findings (Example
  • Fujitsu fi-5530C | Operator's Guide - Page 145
    5.4 Items to check before contacting the agent where you bought the scanner • Others Item Can both the original document and the scanned document image (output paper with Fax) be sent out by e-mail or Fax? Findings 5 TROUBLESHOOTING fi-5530C2 Image Scanner Operator's Guide 129
  • Fujitsu fi-5530C | Operator's Guide - Page 146
    5.5 Checking Labels on the Scanner ■ Positions of Labels on the Scanner Label A Label B Label A (example): Indicates scanner information. Label B (example): Indicates various standards that the scanner conforms with. 130
  • Fujitsu fi-5530C | Operator's Guide - Page 147
    sizes and paper quality for ensuring a correct operation when scanning documents on the ADF. 6 6.1 Document Size ...132 6.2 Document Quality 133 6.3 Maximum ADF Capacity 137 6.4 Area Not To Be Perforated 138 6.5 Specifying How to Detect Multifeed 139 fi-5530C2 Image Scanner Operator's Guide 131
  • Fujitsu fi-5530C | Operator's Guide - Page 148
    6.1 Document Size The following shows the size of documents that can be scanned. A Feeding Direction B Maximum A 297 (11.7 in) B 863.6 (34 in) Minimum A 53 (2.0 in) B 74 (2.9 in) (Unit: mm) 132
  • Fujitsu fi-5530C | Operator's Guide - Page 149
    Thickness Paper thickness is expressed by "paper weight." The following shows the paper weights that can be used on this scanner: • 52 g/m2 to 127 g/m2 (13.9 lb to 34.0 lb) Only a paper weight of 127 g/m2 (34.0 lb) is allowed for A8-size documents. 6 fi-5530C2 Image Scanner Operator's Guide 133
  • Fujitsu fi-5530C | Operator's Guide - Page 150
    • When scanning semi-transparent documents, slide the [Brightness] bar to HINT light to avoid bleed through. • To prevent the rollers from becoming dirty, avoid scanning documents containing large areas written or filled in pencil. If scanning of such documents is inevitable, clean the rollers more
  • Fujitsu fi-5530C | Operator's Guide - Page 151
    of all document sheets must be HINT evenly aligned. Make sure that curling at the leading edge is within the following tolerances: More than 30mm Feed direction Less than 3mm Top of the paper Read surface 6 Less than 5mm Top of the paper Feed direction Read surface fi-5530C2 Image Scanner
  • Fujitsu fi-5530C | Operator's Guide - Page 152
    scanner can scan ID cards through the Automatic Document Feeder with the following precautions. • Place one card at a time into the Auto Document Feeder. • ID card feeding requires the card to be fed through the Auto Document be clean from oil and without labels. • Cards cannot be scanned
  • Fujitsu fi-5530C | Operator's Guide - Page 153
    (sheets) 80 60 40 A3/11 in. x 17 in. 20 70 B4 67 50 47 50 35 33 25 0 52 64 80 104 127 Paper weight (g/m2) Paper weight conversion table Unit Conversion g/m2 52 64 75 80 90 104 127 lb 13.9 17.0 20.0 21.0 24.0 27.9 34.0 6 fi-5530C2 Image Scanner Operator's Guide 137
  • Fujitsu fi-5530C | Operator's Guide - Page 154
    6.4 Area Not To Be Perforated When using the ADF, document trouble might occur if there is any punched hole in the shaded area in the following figure. 35 Top of paper Front side Feeding direction Bottom of paper Center of paper (Unit : mm) 138
  • Fujitsu fi-5530C | Operator's Guide - Page 155
    glued within 35 mm (1.4 in) of the vertical centerline of the document. ATTENTION Multifeed detection by overlap will often mis-detect very thick paper or plastic document. When scanning documents like this, please disable the multifeed detection. 6 fi-5530C2 Image Scanner Operator's Guide 139
  • Fujitsu fi-5530C | Operator's Guide - Page 156
    glued paper or electro-statically charged paper, can result in the miss-detection of multifeed. • Normally multifeed detection will monitor the following area of the document. 35 Top of paper Front side Feeding direction Bottom of paper Center of paper (Unit : mm) 140
  • Fujitsu fi-5530C | Operator's Guide - Page 157
    Chapter 7 SCANNER SPECIFICATIONS This chapter lists the scanner specifications. 7 7.1 Basic Specifications 142 7.2 Installation Specifications 144 7.3 External Dimensions 145 fi-5530C2 Image Scanner Operator's Guide 141
  • Fujitsu fi-5530C | Operator's Guide - Page 158
    7.1 Basic Specifications No. Item Specification 1 Scanner Type 2 Image sensor ADF (Automatic Document Feeder) CCD x 2 Front / Back 3 Light source Incandescent cold cathode Front / Back fluorescent lamp x 2 4 Scanning area Minimum Maximum A8 portrait A3 / 11 x 17 in 127 g/m2
  • Fujitsu fi-5530C | Operator's Guide - Page 159
    the "FUJITSU TWAIN 32" scanner driver. *8) By Using the Imprinter, a character string, such as the alphabet and numbers, can be printed in the scanned document. It helps you to organize your documents by printing a name, date, time or a serial number on the scanned document. 7 fi-5530C2 Image
  • Fujitsu fi-5530C | Operator's Guide - Page 160
    (D x W x H) Weight Input power Voltage Phases Frequency Power consumption Ambient condition Device status Temperature Humidity value of an installation space required to read A3 documents. ATTENTION Refer to Chapter 4 "REPLACING CONSUMABLES" (page 95) for details on the scanned number of
  • Fujitsu fi-5530C | Operator's Guide - Page 161
    7.3 External Dimensions 7.3 External Dimensions The following shows the external dimensions of the fi-5530C2. 399 (15.7") SCANNER SPECIFICATIONS 193 (7.5") 293 (11.5") 225 (8.8") 457 (17.9") 7 (Unit : mm) fi-5530C2 Image Scanner Operator's Guide 145
  • Fujitsu fi-5530C | Operator's Guide - Page 162
    146
  • Fujitsu fi-5530C | Operator's Guide - Page 163
    In Windows 2000 or Windows Vista, double-click on the [fi-5530C2dj] icon. 4. Select the [Events] tab. 5. Select an event. When the operating system you are using is Windows XP, select an event for starting up any application from the [Select an event] menu. A fi-5530C2 Image Scanner Operator's Guide
  • Fujitsu fi-5530C | Operator's Guide - Page 164
    Display, press the [Send to] button) 6. Select an application to be launched when an event occurs. If the operating system you are using is Windows XP, select [Start this program] under [Actions], and then select the application from the drop-down list. 7. Click the [OK] button. The screens and
  • Fujitsu fi-5530C | Operator's Guide - Page 165
    ■ Settings to Configure on the Scanner Function Number Display Function Send to Scan • When you want to use the [Scan] button • Every time you press the [Function] button, the displayed number changes as follows: 1, 2, 3,...9, C, 1, 2, 3... etc. A fi-5530C2 Image Scanner Operator's Guide AP-3
  • Fujitsu fi-5530C | Operator's Guide - Page 166
    53 x 74 mm. ADF (Automatic Document Feeder) A unit that allows the user to scan a number of pages consecutively. Fed documents are transported from the ADF paper chute document, specifically in Duplex reading mode. Automatic separation An image processing method in which the scanner automatically
  • Fujitsu fi-5530C | Operator's Guide - Page 167
    document path in the scanner. Used in daily maintenance of the high volume production level scanner to reduce paper transport problems. Note: these sheets are not meant to replace the more thorough periodic cleaning of the scanner. Color balance Balance of colors in images. B fi-5530C2 Image
  • Fujitsu fi-5530C | Operator's Guide - Page 168
    Higher dpi means better resolution. Driver software In this manual, driver software refers to software that allows the scanning application software to communicate with the scanner. Dropout color A color which is used in the document but does not appear in the read image. Duplex reading mode A mode
  • Fujitsu fi-5530C | Operator's Guide - Page 169
    An input device of the scanner, where documents are placed and scanned. Generally used for scanning pages out of a book, or paper that is out of the feeding specification of the ADF. Also used to scan a small volume of documents by manual operation. B fi-5530C2 Image Scanner Operator's Guide AP-7
  • Fujitsu fi-5530C | Operator's Guide - Page 170
    of the ADF. Also used to scan a small volume of documents by manual operation. Gamma A unit of changes of images' brightness. It is expressed as a function of the electric input power to devices (scanner, display, etc.) and an image's brightness. If the gamma rate is larger than 1, the brightness
  • Fujitsu fi-5530C | Operator's Guide - Page 171
    . In order to use imaging devices designed on the ISIS standard, it is necessary to install the driver software of the same standard. Jaggy images Images that have sharp projections or irregular shape on their edges. Job separation sheet A sheet inserted between documents in a batch for separating
  • Fujitsu fi-5530C | Operator's Guide - Page 172
    improve image quality. Removes particles from the document image. documents. Outline extraction The boundary between black and white areas is traced and the outline extracted for closed areas. Pad ASSY (Pad Assembly) This part is used to separate a sheet of paper from a batch before feeding documents
  • Fujitsu fi-5530C | Operator's Guide - Page 173
    manual insertion of the document until picking starts after the document passes the hopper empty sensor. Pixel (Picture Element) The tiny dots that make up a scanned image. Portrait Orientation of documents or images. Documents/images the initiator. B fi-5530C2 Image Scanner Operator's Guide AP-11
  • Fujitsu fi-5530C | Operator's Guide - Page 174
    sheets of paper from each other. Simplex reading mode A mode for scanning only the front side of the document the scanner. Temporary Error An error FUJITSU or interface board manufactured by a third party. Threshold A value used as a metric for judging a color as black or white. For scanning an image
  • Fujitsu fi-5530C | Operator's Guide - Page 175
    between white colors in unbleached paper (e.g. wood containing paper, etc.) and in scanned images. White Reference Stripe The white part located in the ADF that defines the lightest area in an image, causing all other areas to be adjusted accordingly. B fi-5530C2 Image Scanner Operator's Guide AP-13
  • Fujitsu fi-5530C | Operator's Guide - Page 176
    AP-14
  • Fujitsu fi-5530C | Operator's Guide - Page 177
    from the Image (dropout color 62 Extension 8 F Feed roller 93 FUJITSU ISIS Scanner Driver 16 FUJITSU TWAIN32 Scanner Driver ........ 12 G Glass 93 H Hole Punch Removal 81 How to use the Scanner Driver ......... 12, 29 L Loading Documents on the ADF for Scanning 6 Locations for cleaning 91
  • Fujitsu fi-5530C | Operator's Guide - Page 178
    different Widths 47 Scanning double sided Documents ......... 46 Scanning thin Documents 48 Searchable PDF 55 Security 55 Sheet guide 93 Side guide 9 Skipping blank Pages 64 Split Image 79 Standard Cleaning Cycle 88 T Troubleshooting 109 Turning the Scanner ON 2 U Ultra sonic sensor 93
  • Fujitsu fi-5530C | Operator's Guide - Page 179
    fi-5530C2 Image Scanner Operator's Guide P3PC-1922-01ENZ0 Issue Date: June, 2007 Issued by: PFU LIMITED z The contents of this manual are subject to change without notice. z PFU LIMITED is not liable whatsoever for any damages resulting from the use of this scanner and procedures described in this
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
Operator's Guide
fi-5530C2 Image Scanner
P3PC-1922-01ENZ0