Fujitsu fi 5750C Operator's Guide - Page 151
Document quality - scanner weight
View all Fujitsu fi 5750C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Introduction CONTENTS 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATION 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 ONLINE SETUP 8 DOCUMENT SPECIFICATION OF ADF 8.1 Document size 8.2 Document quality 8.3 Maximum ADF capacity 8.4 Area not to be perforated 8.5 Double feed detection conditions 9 OPTIONS 10 SCANNER SPECIFICATIONS Appendix 8.2 Document quality It is recommended to use documents of wood free paper and wood containing paper. When using other kinds of papers, perform a testscanning with a few sheets of the same type before executing the actual task in order to check whether or not the documents can be scanned. Paper thickness is expressed by "paper weight". Following paper weights can be used with this scanner: A4/Letter and under : 41g/m2 - 203 g/m2 Larger than A4/Letter : .52 g/m2 -203g/m2 (A3 is the maximum size ) The following documents may not be scanned successfully: Documents of non-uniform thickness (e.g. Envelope, etc.) Wrinkled or curled documents Folded or torn documents Tracing paper Coated paper Carbon paper Carbonless paper Photo sensitive paper Perforated or pounced documents Documents that are not square or rectangular Very thin documents 1 | 2 All Rights Reserved, Copyright (C) PFU LIMITED 2003