Garmin 010-10680-50 BlueChart g2 User's Guide North America - Page 11

Getting Started > Installing a BlueChart g2 Preprogrammed Data Card Installing a BlueChart g2 Preprogrammed Data Card Look for a compartment door or rubber weather cap on the bottom (or front for large chartplotters) of your Garmin unit. Beneath the door or weather cap is a slot for a data card. Data Card Slot on a GPSMAP 3206/3210 Data Card Slot on a GPSMAP 492/498 To insert the card, place the card into the slot (connector end first) with the label facing toward the front of the Garmin unit. When the card is in place, close the compartment door, or reinsert the rubber weather cap. See your Garmin unit owner's manual for specific card installation instructions. Caution Insert the connector end of the card into the card slot. Improper installation can result in damage to your Garmin unit and can void your warranty. Caution BlueChart g2 Preprogrammed Data Card Caution: Do NOT use preprogrammed BlueChart g2 data cards for saving MapSource maps. The preprogrammed data will be lost. Remove any BlueChart g2 cards in your Garmin unit before transferring MapSource maps to the unit to avoid losing the preprogrammed data. If you overwrite the preprogrammed data on a BlueChart g2 card, Garmin will NOT replace or recover the lost data. BlueChart g2 User's Guide