Home » Garmin Manuals » Marine Electronics » Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 20 and Shadow Drive Pack » Manual Viewer

Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 20 and Shadow Drive Pack - Page 2

and Shadow Drive

View all Garmin Compact Reactor 40 Hydraulic Autopilot with GHC 20 and Shadow Drive Pack manuals

Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

© 2013 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product. Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. GHC™ and Shadow Drive™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. NMEA®, NMEA 2000®, and the NMEA 2000® logo are registered trademarks of the National Marine Electronics Association.

Section	Page
Table of Contents	3
Introduction	5
Device Overview	5
Heading Screen	5
Standby Mode	5
Powerboat Autopilot Operation	5
Heading Hold	5
Engaging the Autopilot	5
Heading Adjustment	5
Enabling Shadow Drive	5
Adjusting Shadow Drive Sensitivity	5
Adjusting the Heading with the Helm	6
Selecting the Steering Mode	6
Adjusting the Heading with the Keys	6
Adjusting the Step Steering Increment	6
Direction Control	6
Enabling Direction Control	6
Using Direction Control	6
Steering Patterns	6
Zigzag Pattern	6
Setting Up the Zigzag Pattern	6
Following a Zigzag Pattern	6
Circles Pattern	6
Setting Up the Circles Pattern	6
Following the Circles Pattern	6
U-Turn Pattern	6
Following the U-Turn Pattern	6
Williamson Turn	6
Following the Williamson Turn Pattern	6
Cancelling a Steering Pattern	7
GPS Steering Patterns	7
Following a GPS Steering Route	7
Orbit Pattern	7
Following an Orbit Pattern	7
Cloverleaf Pattern	7
Setting Up the Cloverleaf Pattern	7
Following the Cloverleaf Pattern	7
Search Pattern	7
Setting Up the Search Pattern	7
Following the Search Pattern	7
Sailboat Autopilot Operation	7
Wind Hold	7
Setting the Wind Hold Type	7
Engaging Wind Hold	7
Engaging Wind Hold from Heading Hold	7
Adjusting the Wind Hold Angle with the Autopilot	7
Tack and Gybe	8
Tacking and Gybing from Heading Hold	8
Tacking and Gybing from Wind Hold	8
Setting a Tack and Gybe Delay	8
Enabling the Gybe Inhibitor	8
Adjusting the Autopilot Response	8
Device Configuration	8
User Autopilot Settings	8
Configuring the Remote Control	8
Searching for a Remote Control	8
Pairing a Remote	8
Assigning Remote Button Actions	8
Disconnecting a Remote Control	8
Display Settings	8
System Settings	8
Selecting the Preferred Heading Source	9

Match case Limit results 1 per page

products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to

www.garmin.com

for current updates

and supplemental information concerning the use of this product.

Garmin

and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. GHC

™

and Shadow Drive

™

are trademarks of Garmin Ltd. or its

subsidiaries. These trademarks may not be used without the express permission of Garmin.

NMEA

, NMEA 2000

, and the NMEA 2000

logo are registered trademarks of the National Marine Electronics Association.