Garmin ECHOMAP Plus 44cv Installation Instructions

Garmin ECHOMAP Plus 44cv Manual

Get Garmin ECHOMAP Plus 44cv PDF manuals and user guides View all Garmin ECHOMAP Plus 44cv manuals
Add to My Manuals
Save this manual to your list of manuals

Garmin ECHOMAP Plus 44cv manual content summary:

  • Garmin ECHOMAP Plus 44cv | Installation Instructions - Page 1
    avoid damage to your boat, install the device according to these instructions. Read all installation instructions before proceeding with the installation. If you experience difficulty during the installation, contact Garmin® Product Support. Software Update You may need to update the device software
  • Garmin ECHOMAP Plus 44cv | Installation Instructions - Page 2
    Installing the Swivel Base Fastening the Swivel Mount without the Cables Running through the Mount You should complete this procedure only if you are not running the power and transducer cables under the mounting surface and through the swivel-mount base. 1 Place the base on the mounting surface,
  • Garmin ECHOMAP Plus 44cv | Installation Instructions - Page 3
    If the devices are not mounted near each other, obtain a User Data Sharing Cable (010-12234-06), and connect the devices following the instructions included with the cable. 3 On both devices, select Navigation Info > Manage Data > User Data Sharing. User data is shared between the connected devices
  • Garmin ECHOMAP Plus 44cv | Installation Instructions - Page 4
    NOTE: If the cables are not inserted far enough into the cradle, the connectors may not connect securely to the ports, and the device may appear to lose power or stop working. 4 Place the locking bracket over the cables and slide the bracket down to lock the cables in place. There is an audible
  • Garmin ECHOMAP Plus 44cv | Installation Instructions - Page 5
    Receive Sentence DPT DBT MTW VHW WPL DSC DSE HDG HDM MWD MDA MWV VDM Description Depth Depth below transducer Water temperature Water speed and heading Waypoint location Digital selective calling information Expanded digital selective calling Heading, deviation, and variation Heading, magnetic Wind
  • Garmin ECHOMAP Plus 44cv | Installation Instructions - Page 6
    © 2017 Garmin Ltd. or its subsidiaries support.garmin.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
ECHOMAP
™
PLUS 40
SERIES
INSTALLATION
INSTRUCTIONS
Important Safety Information
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
When connecting the power cable, do not remove the in-line
fuse holder. To prevent the possibility of injury or product
damage caused by fire or overheating, the appropriate fuse
must be in place as indicated in the product specifications. In
addition, connecting the power cable without the appropriate
fuse in place voids the product warranty.
CAUTION
Always wear safety goggles, ear protection, and a dust mask
when drilling, cutting, or sanding.
NOTICE
When drilling or cutting, always check what is on the opposite
side of the surface.
To obtain the best performance and to avoid damage to your
boat, install the device according to these instructions.
Read all installation instructions before proceeding with the
installation. If you experience difficulty during the installation,
contact Garmin
®
Product Support.
Software Update
You may need to update the device software when you install
the device or add an accessory to the device.
This device supports up to a 32 GB memory card, formatted to
FAT32.
Loading the New Software on a Memory Card
You must copy the software update to a memory card using a
computer that is running Windows
®
software.
NOTE:
You can contact Garmin customer support to order a
preloaded software update card if you do not have a computer
with Windows software.
1
Insert a memory card into the card slot on the computer.
2
Go to
www.garmin.com/support/software/marine.html
.
3
Select
echoMAP Series with SD Card
.
4
Select
Download
next to
echoMAP Series with SD Card
.
5
Read and agree to the terms.
6
Select
Download
.
7
Choose a location, and select
Save
.
8
Double-click the downloaded file.
9
Select
Next
.
10
Select the drive associated with the memory card, and select
Next
>
Finish
.
A Garmin folder containing the software update is created on the
memory card. The software update can take several minutes to
load onto the memory card.
Updating the Device Software
Before you can update the software, you must obtain a
software-update memory card or load the latest software onto a
memory card.
1
Turn on the chartplotter.
2
After the home screen appears, insert the memory card into
the card slot.
NOTE:
In order for the software update instructions to
appear, the device must be fully booted before the card is
inserted.
3
Follow the on-screen instructions.
4
Wait several minutes while the software update process
completes.
5
When prompted, leave the memory card in place and restart
the chartplotter manually.
6
Remove the memory card.
NOTE:
If the memory card is removed before the device
restarts fully, the software update is not complete.
Tools Needed
•
Drill
•
Drill bits
◦
Bail mount: drill bits appropriate for the surface and
hardware
◦
Swivel mount: 3 mm (
1
/
8
in.) drill bit
◦
Flush mount: 3 mm (
1
/
8
in.) and 9.5 mm (
3
/
8
in.) drill bits
•
#2 Phillips screwdriver
•
Jigsaw or rotary tool
•
File and sandpaper
•
Marine sealant (optional)
Mounting Considerations
The device can be mounted using the included bracket, or it can
be mounted flush with the dashboard using a flush-mount kit
(may be sold separately).
Before permanently installing any part of your device, you
should plan the installation by determining the location of the
various components.
•
The mounting location must provide a clear view of the
screen and access to the keys on the device.
•
The mounting location must be sturdy enough to support the
device and the mount.
•
The cables must be long enough to connect the components
to each other and to power.
•
The cables can be routed under the bail mount or behind the
device.
•
To avoid interference with a magnetic compass, the device
should not be installed closer to a compass than the
compass-safe distance value listed in the product
specifications.
GUID-760FBC47-2446-4474-B03E-DC2085C730B6 v2
June 2020