Garmin Edge 705 Quick reference guide - Page 5

be used under the mount for a better viewing angle. To install the Edge on your bike: 1. Place the wedge on the bike stem or the handlebars, and then place the bike mount on the wedge. Make sure the release lever is on the left. Release lever Wedge 2. Attach the bike mount securely using two cable ties. 3. Align the Edge with the bike mount so that the slots on the back of the unit are parallel with the rails on the mount. Rail Bike mount For bars with a diameter less than 1 in (25.4 mm): Place the additional rubber pad under the bike mount to increase the diameter of the bar. The rubber pad also prevents the mount from slipping. Continue with step 2. Slot Cable ties Release lever 4. Slide the Edge to the left until it snaps into place.