Garmin Edge 705 Quick reference guide - Page 8
GSC 10 - out front mounts
UPC - 753759066956
View all Garmin Edge 705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
GSC 10 Both magnets must be aligned with their respective indication lines for the Edge to receive data. To install the GSC 10: 1. Place the GSC 10 on the rear chain stay (on the side opposite the drive train). Loosely attach the GSC 10 using two cable ties. 2. Attach the pedal magnet to the crank arm using the adhesive mount and a cable tie. The pedal magnet must be within 5 mm of the GSC 10 and the indication line on the pedal magnet must line up with the indication line on the GSC 10. 3. Unscrew the spoke magnet from the plastic piece. Place the spoke in the groove of the plastic piece and tighten slightly. The magnet can face away from GSC 10 if there is Indication line Reset button Cable ties GSC 10 on rear chain stay Cable tie Indication line Pedal magnet on crank arm