Garmin Montana 650t Instructions - Page 3
CoNNectING PoweR to the MouNt - instructions
View all Garmin Montana 650t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Connecting Power to the Mount Notice If any wire is left unconnected, insulate the wire and safely secure it on your vehicle. 1. Select a location to mount the Montana on your vehicle, based on available power sources, safe cable routing, and that the driver view is not obstructed. 2. Connect the red ➊ and black ➋ wires to your vehicle's main power (10 to 50 Volts). 3. If necessary, connect the serial data wires to your vehicle. • Yellow ➌ is the serial data input wire. • Blue ➍ is the serial data output wire. • Green ➎ is the serial ground wire. 4. If necessary, connect the audio jack ➏. AMPS Rugged Mount Instructions EN-3
AMPS Rugged Mount Instructions
EN-3
CoNNectING PoweR to the MouNt
notice
If any wire is left unconnected, insulate the wire and safely secure it on your
vehicle.
1.
Select a location to mount the Montana on your vehicle, based on available
power sources, safe cable routing, and that the driver view is not obstructed.
2. Connect the red
➊
and black
➋
wires to your vehicle’s main power (10 to 50
Volts).
➏
➋
➊
➌
➍
➎
3.
If necessary, connect the serial data wires to your vehicle.
•
Yellow
➌
is the serial data input wire.
•
Blue
➍
is the serial data output wire.
•
Green
➎
is the serial ground wire.
4. If necessary, connect the audio jack
➏
.