Garmin Nuvi 465T Quick Start Manual - Page 3
Set Up Your nüvi - windshield mount
UPC - 753759086398
View all Garmin Nuvi 465T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Set Up Your nüvi Attach the Adhesive Disk and the Mounting Base to Your Dashboard caution: The permanent adhesive disk is extremely difficult to remove. 5. Snap the cradle onto the mounting arm. Cradle Mounting arm 1. Clean and dry the area where you want to place the mounting base. 2. Select the adhesive disk you want to use, and remove one side of the backing. Temporary Disk Permanent Disk 3. Place the adhesive disk on the bottom of the mounting base, and remove the other side of the backing. 4. Place the mounting base so that the locking lever is facing you. Position the base on the cleaned area. Apply pressure to adhere the base to the dashboard. 6. Slide the mounting arm with cradle attached into the mounting base. Mounting base Mounting arm with cradle 7. Slide the locking lever into the locked position. Before mounting the traffic receiver, see the Important Safety and Product Information guide for information about laws pertaining to windshield mounting. nüvi 465 quick start manual