Garmin Nuvi 465T Quick Start Manual - Page 4

Mount Your nüvi 1. Plug the vehicle power cable into the back of your nüvi. 2. Fit the bottom of your nüvi into the cradle. 3. Tilt your nüvi back until it snaps into place. 4. Plug the other end of the vehicle power cable into a power outlet in your vehicle. Your unit should turn on automatically if it is plugged in and the vehicle is running. 5. If you are using a traffic receiver in Europe, connect the external antenna to the traffic receiver and secure the external antenna to the windshield using the suction cups. When you create a route, your nüvi customizes the route to meet the restrictions of your truck profile. It is your responsibility to account for your vehicle's height, length, weight, and other relevant restrictions when driving. Always defer to all posted road signs and road conditions when making driving decisions. Acquire Satellites Go outdoors to an open area, away from tall buildings and trees. Acquiring satellite signals can take a few minutes. The bars indicate satellite strength. When at least one of the bars is green, your nüvi has acquired satellite signals. Enter Your Truck Profile 1. Turn on your nüvi. 2. Touch Verify Truck Settings > New. 3. Touch the button in each category to enter information. 4. Touch Save. 5. Enter the name for the profile, and touch Done. Find Points of Interest 1. Touch Where To? > Points of Interest. 2. Select a category and a subcategory. 3. Select a destination, and touch Go!.  nüvi 465 quick start manual