Garmin StreetPilot 2720 Owners Manual - Page 42
Appendix, Connecting to Your Computer, Step 1: Load USB Drivers, Step 2: Plug in the USB cable - map updates
UPC - 753759048945
View all Garmin StreetPilot 2720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Appendix Appendix Connecting to Your Computer To update your software and load additional maps or Custom POIs, you need to connect your 2720 to your computer using the USB cable provided. Note: Do not connect the USB cable to your computer until you have loaded the USB drivers using the enclosed CD-ROM. Step 1: Load USB Drivers Place the enclosed USB Driver CD-ROM into your computer's CD-ROM drive. If the CD-ROM does not start automatically, click Start and then Run.... Type the letter of your CD-ROM drive followed by setup (for example D:\setup). Then press Enter. Follow the instructions on your computer screen. Step 2: Plug in the USB cable: 1. Connect the power cable. 2. Lift the bottom flap of the weather cap. 3. Plug the mini-USB connector into the connector on the back of the 2720, under the weather cap. 4. Plug the other end of the cable into an available USB connector on your computer. 36 StreetPilot 2720 Owner's Manual