Garmin VHF 110 Marine Radio Owners Manual - Page 5

Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Radio Overview Handset Overview VHF 110 PTT À or Á North America: 16/9  International: 16+ Hold to broadcast. Select to change the channel on the radio. Select to toggle between preset channels. Home Screen Item Key DISTRESS À VOL/SQ Á  SELECT à PWR North America: 16/9 International: 16+ DSC HI/LO CLEAR MENU VHF 210 AIS Description Lift the door and press to send a DSC distress call with a programmed MMSI number (Entering Your MMSI Number, page 4). Press the dial to switch between volume or squelch. Rotate the dial to adjust the volume or squelch level. Select the key that corresponds to the onscreen item to select the item. On the home screen, rotate the dial to change the channel. On the home screen, press the dial to toggle weather channels (NOAA® Weather Broadcasts and Alerts, page 4). Rotate the dial to highlight an item in a list. Press the dial to select an item. Hold to turn the radio on and off. Press to toggle between preset channels. Select to view a menu of DSC options. Select to change the transmission mode and power settings. Select to return to the previous menu option. Select to cancel or mute an incoming DSC call. From the home screen, select to view configuration options. From a menu, select to return to the home screen. Current radio system status, settings, and alerts. À Current International, Canadian, or USA frequency band Á *Current latitude  *Current longitude à *Current time Ä **Current speed over ground (SOG) or course over ground (COG) Å Soft-key functions change depending on your current activity Æ Current working channel Ç *The current latitude, longitude, and time appear when the transceiver is connected to a GPS device. You can enter data manually when the transceiver is not connected to a GPS device. ** The current SOG and COG appear when the transceiver is connected to a GPS device, and the option is enabled in the menu (Number Settings, page 9). System Status Icons Icon Status Receiving an incoming signal Transmitting Transmitting at 25 W Transmitting at 1 W Saved channel Local receiver mode, often used in areas with radio frequency interference (harbors) ATIS enabled Position tracking enabled Auto channel changing disabled Incoming or missed DSC call Introduction 1