Garmin nuvi 5000 Quick Start Manual - Page 3

Step 1: Mount the nüvi To mount the nüvi using the suction cup mount: 1. Plug the vehicle power cable into the power connector on the right side of the cradle. Cradle Power cable 2. Clean and dry your windshield with a lintfree cloth. Remove the clear plastic from the suction cup. Place the suction cup on the windshield. 3. Snap the cradle onto the suction cup arm. 4. Flip the lever back, toward the windshield. Suction cup mount 5. Fit the bottom of your nüvi into the cradle. 6. Tilt the nüvi back until it snaps into place. 7. Plug the other end of the vehicle power cable into a power outlet in your vehicle. Your unit should turn on automatically if it is plugged in and the vehicle key is turned to the ON/ACC position. Step 2: Configure the nüvi To turn on your nüvi, connect the power cable to the unit and plug the other end of the power cable into a power outlet in your vehicle. Turn your vehicle key to the ON/ACC position, and your unit should turn on automatically. Follow the on-screen instructions.