Gateway 7400 Rackmount Installation Guide - Page 15

4 Position the back mounting bracket (labeled REAR) on the back vertical mounting rail. 5 Attach the back mounting bracket to the back vertical mounting rail using two screws from the accessory kit. 6 Mount the second set of brackets on the opposite side of the cabinet by repeating Steps 2 through 5. Installing the cabinet mounting rails onto Gateway brackets To install the cabinet mounting rails onto Gateway brackets: 1 Align the back end of the cabinet mounting rail to the back mounting bracket by sliding the inner rail forward (if the spring latch locks the inner rail into place, free the rail by releasing the spring latch). Inner rail Front mounting bracket Front vertical mounting rail Spring latch Back mounting bracket Back vertical mounting rail 2 Attach the back end of the cabinet mounting rail to the back mounting bracket using a screw from the accessory kit. 10 Installation