Gateway 7400 Rackmount Installation Guide - Page 16
Attach the second screw to the front mounting bracket by repeating
View all Gateway 7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
3 Align the front of the cabinet mounting rail to the front mounting bracket by sliding the inner rail and inner slide until the rail screw hole opening lines up with one of the front mounting bracket screw holes. Inner rail Inner slide Front vertical mounting rail Spring latch Cabinet mounting rail Back vertical mounting rail 4 Attach the front of the cabinet mounting rail to the front mounting bracket using a screw from the accessory kit. 5 Attach the second screw to the front mounting bracket by repeating Steps 3 and 4. 6 Mount the second cabinet mounting rail on the opposite side of the cabinet by repeating Steps 1 through 5. 7 Go to "Mounting the system drawer in the cabinet" on page 15. Installing the cabinet mounting brackets and mounting rails 11