Gateway DX430X 8512041 - Gateway Hardware Reference Guide (5-bay uATX Case) - Page 79
Diskette drive
View all Gateway DX430X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
www.gateway.com • DVDs and DVD drives contain regional codes that help control DVD title exports and help reduce illegal disc distribution. To be able to play a DVD, the disc's regional code and your DVD drive's regional code must match. The regional code on your DVD drive is determined by your computer's delivery address. The regional code for the United States and Canada is 1. The regional code for Mexico is 4. Your DVD drive's regional code must match the regional code for the disc. The regional code for the disc is on the disc, disc documentation, or disc packaging. If the DVD movie does not play, the disc's regional code and your DVD drive's regional code may not match. Diskette drive The diskette drive is not recognized • Shut down and restart your computer. You cannot save a file to diskette or you see the message "disk is full or write-protected" • Make sure that the write-protection tab on the upper-right corner of the diskette is down (unprotected). • Delete unnecessary files on the diskette and try again. • Make sure that the diskette you are using is IBM-compatible. • Try a different diskette. Occasionally diskettes are flawed and cannot be read by the diskette drive. • Run Error-checking on the diskette. For more information, see "Checking the hard drive for errors" on page 60. If errors are detected and corrected, try using the diskette again. You see an "Access Denied" or "Write protect" error message • Move the write-protection tab in the upper-right corner of the diskette down (unprotected). • The diskette may be full. Delete unnecessary files on the diskette and try again. • Make sure that the diskette you are using is IBM-compatible. • Try a different diskette. Occasionally diskettes are flawed and cannot be read by the diskette drive. 73