GE 24116 Instruction Manual - Page 7
Direct Code Entry - program codes
UPC - 030878241168
View all GE 24116 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Direct Code Entry 1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. 2. Press and release the desired mode button (TV, DVD, etc.). The red indicator blinks, then stays lit. 3. Enter the 4-digit code from the code tables (on separate sheet). Note: After a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. 4. With your device on, press CHAN UP. If the device responds, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand. Write your codes down here for easy reference later. Device Device stored Code TV TV DVD CBL/SAT DVR/AUX
7
Direct Code Entry
1±...Press.and.hold.the.
SETUP
.button.until.the.red.
indicator.stays.on,.then.release.the
SETUP
.button±
2±...Press.and.release.the.desired.mode.button.(
TV
,
DVD
,.etc±)±.The.red.indicator.blinks,.then.stays.lit±..
3±. Enter.the.4-digit.code.from.the.code.tables.(on.
separate.sheet)±.Note:.After.a.valid.code.entry,.the.
red.indicator.turns.off±..For.an.invalid.code,.the.red.
indicator.flashes±
4±. With.your.device.on,.press
CHAN UP
±.If.the.device.
responds,.no.further.programming.is.required±.
Note:.If.some.buttons.do.not.operate.your.
equipment,.try.one.of.the.other.codes.for.your.
brand±
Write.your.codes.down.here.for.easy.reference.later±
Device.
Device.stored.
Code
TV..
TV
DVD.
CBL/SAT
DVR/AUX