GE AJCQ10DCG Use and Care Manual - Page 6

$ERXWWKHFRQWUROVRQWKHDLUFRQGLWLRQHU³+HDW&RRO0RGHOV Appearance may vary. On Off Timer On Off Hi Low Fan Temp Cool Fan Mode Heat Power On/Off Controls Air Conditioner Controls Lights beside the touch pads on the air conditioner control panel indicate the selected settings. 1. ON/OFF Turns air conditioner on and off. 2. Display Displays the temperature setting. Displays hours when setting the timer. 3. MODE On the air conditioner controls, use to set COOL, HEAT or FAN mode. Indicator lights on the air conditioner controls will show the mode selected. 4. TEMP Increase + /Decrease - Pads Use to set temperature when in COOL or HEAT mode. 5. FAN Speeds Use to set the fan speed at LOW or HIGH. Indicator lights will show the speed selected. Remote Control 6. TIMER 21³When the air conditioner is off, it can be set to automatically turn on in half an hour to 24 hours at its previous setting. Each touch will set the time in half hours up to 10 and then in hours up to 24. To cancel the On Timer, press the ON pad until "CL" appears. Then wait until the display turns off. 2))³When the air conditioner is on, it can be set to automatically turn off in half an hour to 24 hours. Each touch will set the time in half hours up to 10 and then in hours up to 24. To cancel the Off Timer, press the OFF pad until "CL" appears and wait for the set temperature to be displayed. The unit will now resume normal operation. 7. Remote Control Signal Receiver NOTE: When the air conditioner is turned on, it will automatically start in the setting last used. Remote Control „To ensure proper operation, aim the remote control at the signal receiver on the air conditioner. „The remote control signal has a range of up to 21 feet. „Make sure nothing is between the air conditioner and the remote control that could block the signal. „ 0DNHVXUHEDWWHULHVDUHIUHVKDQGLQVWDOOHGFRUUHFWO\³VHH the Care and Cleaning section. 6